help!!!

  1. Saxperience Addict Joined: May 2006 Costa del Wales Posts: 12393 Spam Wagon
    #1
    im trying to take the surround out around the vents and the radio.ive got the two side 1s out but cant get the middle 1 out.ne adivce
  2. Established Member Joined: Jun 2006 Durham - NOT WALES!! Posts: 1952 Saxo SX 1.1
    #2
    the centre console?
  3. Saxperience Addict Joined: May 2006 Costa del Wales Posts: 12393 Spam Wagon
    #3
    yer mate
  4. Established Member Joined: Jun 2006 Durham - NOT WALES!! Posts: 1952 Saxo SX 1.1
    #4
    you got the 2 off which are under the plugs near the hazard lights?which is the other one you cant get off, where is it?
  5. Established Member Joined: Jun 2006 Durham - NOT WALES!! Posts: 1952 Saxo SX 1.1
    #5
    Ive painted mine but it did not have the very bottom screw in (under ash tray) so i dont know if it is hard to get off sorry....
  6. Forum Section Moderator Joined: Sep 2005 Chinnor Posts: 3941 Audi A3
    #6
    If you see the row of 5 or so switches, where the hazard and rear window demister switches are, you need to unclip the two end blanking plates (with rounded corners) there are two torx screws under there....

    Then there are two torx screws on the underside flap where it indents by the fan, you have to look up at it to see them...

    There is then once last torx bit at the very bottom in the middle...

    Once all of them are removed you can lift and pull out the console... just make sure you disconnect the wires before you pull it fully out :Y:

    Alternatively there is a guide here

    Hope that helps
    Alex
  7. Established Member Joined: Jun 2006 Durham - NOT WALES!! Posts: 1952 Saxo SX 1.1
    #7
    If you take the vents out, dont loose the pins, i lost 1 and it does not pull upwards propperly now lol.....
  8. Saxperience Addict Joined: May 2006 Costa del Wales Posts: 12393 Spam Wagon
    #8
    ok cheers lads