Fan or temp sensor

17th October 2011, 17:52

Guys my fan aint kickn in,30amp fuse was gone,put new 1 in,stil no go! put two wires frm batery an fan didnt spin,i put d wires behind d litle black flap where the wires end on fan,wud it have made d proper conection as i dnt knw if its metal around d wires in the litle box

17th October 2011, 19:28

Sounds like your fan motor has had it,unless your not making proper contact with the cables.

19th October 2011, 18:12

Whats the best way to do it mate.. i need help asap as have orderd a sensor from citreon

19th October 2011, 18:14

I also heard a click i think it was in the fuse box around the time the fan was ment to click in,would this rule out the temp sens

19th October 2011, 18:34

Peard back the wires goin to fan an put two wires to battery,it started sparkn. the car was runin

19th October 2011, 18:54

Be careful doing it that way mate,you`ve only got to have a tiny fuel leak & well the rest is history.The best way is to take the fan off the car then if you have a spare battery use that to test the fan.

19th October 2011, 19:06

Yeh thanks mate.. but im nearly sure its the fan now anyway,getn one 2mro from scrapyard! this would have its effect on low heat in the car due to not bleeding correctly?

19th October 2011, 19:13

No it wouldn`t the fan only cuts in when your engine gets to a certain temperature.Your heaters not getting hot is either caused by a air lock(most probs)or a blocked cooling system meaning the water isn`t circulating properly.

19th October 2011, 21:54

thanks for the replys steve.. will post up 2mro when get the new fan in! thanks again