Will these alloy's http://www.ebay.co.uk/itm/2708385470...#ht_600wt_1185 Fit my 1.1 forte its std and not been lowered cheers guys.
Will these fit?
-
#1
-
#2In simple words..... NO. They will not fit.1 user thanked this post:
-
#3well with some work like adapters to change stud pattern but not really worth effort
-
#4they have a PCD (stud pattern) of 4x100 and for a saxo you need 4x108 as said you can buy hub adapters to get them to fit
the add doesnt say what the ET (offset) is, but bare in mind if you buy hub adapters then they are usually 20mm wide which will reduce the offset by 20, for a saxo you need an offset of ET15 so if they were ET35 then a hub adapter 4x100-4x108 20mm wide would be needed -
#5the et is 30. it says at the bottom
-
#6edit it says they have an offset of 30 so really need a 15mm spacer but 20mm hub adapter
would be fine -
#8Ahhh sorrys guys bit off a dope when it comes to cars as ive done things on bikes for years
-
#10Buy sutin else, they look lame. If you look hard there's so many wheels out there in 4x108
