stalling vts.

  1. #1
    HELP ! right, I have a saxo vtr, with a vts conversion.. my problem is, the idle is fine, but when I approach a set of lighys and change down through the gears, it sometimes wants to stall, and actually sometimes does I has a brand new icv fitted today, as the Idle was rough, that was sorted with the new icv, but now this is happening any suggestions ??
  2. #2
    Pleeeease help
  3. #3
    Mine did this, except it actually did stall leaving me with crap brakes and heavy steering untill i started it again, not good whilst driving! I also fitted a new icv but in the end i just took the the throttle body off, stripped it down and cleaned everything with carb cleaner, the butterfly seemed to be a bit rough when it was returning. Gave that a bit of wd40 after a clean and its literally been perfect since, that was 6 months ago, worth a try!
  4. #4
    Really appreciate someone getting back to me with some help, ill give that ago as soon as I have some free time. I drove it today and touch wood, it was ok..Cheers dude, much appreciated.
  5. #5
    Yeah no worries, got to be worth a try, took about half hour so if it doesnt work its not the worst thing!
  6. #6
    Update. My mate who is a mechanic looked at it yesturday and had a play around. He seems yo think the ecu could be faulty ?? Anyway he had a fiddle and made the car rev slightly higher, (don't want to jinx ) but It seems fine ! Fingers crossed it stsys that way ....
  7. #7
    Could be worth replacing the green temperature sensor, I had this problem and that change resolved it
  8. #8
    Funny you should say that, iv literally just noticed that the green plug seemed a little "weathered".. fact question, but what is the cost of that ??