can a icv make the engine cut out. engine just seems to cut out i pull over it stutters a bit then starts then wont do it for days. the revs have been jumping a bit to point where its nearly stalling when pulling up to junctions. ive changed everything except icv and lambda. only other thing is head gasket.
can a dodgey icv make car cut out when driving?
-
#1
-
#2could be m8 i had to do mine on my vtr
-
Regular Poster
Joined: Sep 2011
Wirral
Posts: 280
desire
#3Yes it can, mine used to cut out on braking hard from 60/70 ish, frightened the life out me the first time it happened.
Revs on idle used to go up and down like a lap dancer's arse.
Bought a new one and it's been great since, smooth idle and no more frightening me under heavy braking. -
#4did you get any shaking when idling when cold?
-
Regular Poster
Joined: Sep 2011
Wirral
Posts: 280
desire
#5It'll cause different symptoms depending on where the shaft it's sticking. You'll get revs from near stalling to 4000/cuts out when lifting off pedal completely/slight hunting on idle, if it's not idling correctly the ICV should be the first thing to check. Best £20 I've spent on the BOS.
-
#6where did you get yours from was it new or used ? ive had a look on ebay some are about 50 some 25 not sure their for vtr though. will icv off other models fit?
-
Saxperience Forum Bum
Joined: Mar 2009
Stoke-on-trent
Posts: 2640
Mk5 Golf GTTDI
Mk2 VTR Project
#7This is the icv i bought for my Mk2 vtr, its made by VDO which is the same as the original equipment. Don't bother buying the cheaper ones on ebay they are absolutely crap ive tried them.. either go for original equipment or a good second hand one if you don't want to spend that much
http://www.ebay.co.uk/itm/Citroen-Sa...item2a14dc7044 -
Regular Poster
Joined: Sep 2011
Wirral
Posts: 280
desire
#8Got mine from ebay, take it off and have a look at the part no, mine was B35/00. Easier to take the throttle housing off and then remove the icv.
-
#9looks like ill be buying a decent second hand one then. i would of bought the one you got its just that ive spent loads of money tryin to get it running right and cant be arsed wasting more to see no improvement. do you know if i can get one off any other saxos like 1.4's or something cheersQuote:Originally Posted by Ben_SaxoForte
This is the icv i bought for my Mk2 vtr, its made by VDO which is the same as the original equipment. Don't bother buying the cheaper ones on ebay they are absolutely crap ive tried them.. either go for original equipment or a good second hand one if you don't want to spend that much
http://www.ebay.co.uk/itm/Citroen-Sa...item2a14dc7044 -
Saxperience Forum Bum
Joined: Mar 2009
Stoke-on-trent
Posts: 2640
Mk5 Golf GTTDI
Mk2 VTR Project
#10Not sure about others but im pretty sure the vts has the same one, well i had a vts inlet and the icv was the same as my vtr one so i assume so.. but as long as its the same shape and has the correct plug it should fit. have a look on the one on your car though it will have the part number so you can match it up.Quote:Originally Posted by vtrmann
looks like ill be buying a decent second hand one then. i would of bought the one you got its just that ive spent loads of money tryin to get it running right and cant be arsed wasting more to see no improvement. do you know if i can get one off any other saxos like 1.4's or something cheers
-
#11cheers looks like another trip to the scrappy. theyll be makin some money off me costs a quid just to get in, might aswell get a job there lolQuote:Originally Posted by Ben_SaxoForte
Not sure about others but im pretty sure the vts has the same one, well i had a vts inlet and the icv was the same as my vtr one so i assume so.. but as long as its the same shape and has the correct plug it should fit. have a look on the one on your car though it will have the part number so you can match it up.