Saxo VTR / VTS single plug loom pin out

22nd December 2011, 21:28

Not sure if this will be any help to anyone, but whilst getting a non running 16v conversion going I've done all the pin outs for the body loom connection on a single plug ECU with old style inner wing loom plug. So I thought, whilst I have this information I might as well post it up in case it comes in handy for anyone.

Plug layout

3 2 1
8 7 6 5 4
14 13 12 11 10 9
19 18 17 16 15
23 22 21 20

VTR

1 ECU pin 48
2 ECU pin 20
3 ECU pin 19
4 ECU pin 22
5 ECU pin 21
6 Cranking
7 Reverse switch pin 1
8 Reverse switch pin 2
9 ECU pin 44
10 Relay pin 9 Fuel pump output
11 Lambda pin 1 Feed
12 Oil pressure switch
13 Charging light
14 Oil level sensor pin 1
15 Coolant temp sensor pin 1
16 Oil level sensor pin 2
17 Coolant temp sensor pin 2
18 Blank
19 ECU pin 43
20 ECU pin 22
21 Blank
22 Blank
23 Road speed signal

VTS

1 ECU pin 13
2 ECU pin 31
3 ECU pin 12
4 ECU pin 48
5 Relay pin 14
6 Cranking
7 Reverse switch pin 1
8 Reverse switch pin 2
9 ECU pin 42
10 Relay pin 13 Fuel pump output
11 Lambda pin 1 Feed
12 Oil pressure switch
13 Charging light
14 Oil level sensor pin 1
15 Coolant temp sensor pin 1
16 Oil level sensor pin 2
17 Coolant temp sensor pin 2
18 Oil temp sensor
19 ECU pin 9
20 ECU pin 27
21 Blank
22 Blank
23 Road speed signal

Probably no help to anyone, but on the off chance thought it worth posting

22nd December 2011, 21:43

change title to saxo vtr vts single plug loom pin out

then a mod sticky it, should be very handy tbh

22nd December 2011, 21:50

I've changed the title, could probably do the pin outs for the fuel pump relay and ecu for the vtr loom as I still have that laying round, but the vts loom is now in the car as I've got it running