Important! : I need help please !!! 106 quicksilver to vtr conversion

  1. Newbie Joined: Jan 2012 derbyshire Posts: 7 106 quicksilver with vtr engine in
    #1
    Hi am new to hear but i gotta big problem i did a vtr conversion to my 1.4 quicksilver las week it ran but didnt start on the key i had to bump it turned out vtr loom were dodgey but before i put the 1.4 loom it i lost fuel pressure and got no spark the overheating light comes on after i turn the engine over and so does the fan pu the 1.4 loom in and it turns over as normall but no start and still got light and fan comeing on when it wonts to any ideas will be greatly apprishated thanks
  2. Newbie Joined: Jan 2012 derbyshire Posts: 7 106 quicksilver with vtr engine in
    #2
    bump .......
  3. Established Member Joined: Aug 2010 Chippenham/Bristol Posts: 1892 1962 Austin Mini, BMW 330ci
    #3
    I don't really understand exactly what you've written, so if you could re-write it properly would help mate.

    What parts did you get for the conversion? engine, gearbox, loom, ecu etc? Did the engine come with all the sensors? e.g. did the every plug on the loom connect up? Have you removed the immobilisor box before you plugged the new ecu in?

    Ps don't bump threads every hour mate.
  4. Saxperience Forum Bum Joined: Dec 2008 Lancs Posts: 4124 JP4S'd R.
    #4
    That's hard to read mate.

    Sound's like you've put a 1.4 loom on and connected the VTR ecu to it?

    So doesn't prime fuel and no spark? Is there a key lit up on the dash?
  5. Newbie Joined: Jan 2012 derbyshire Posts: 7 106 quicksilver with vtr engine in
    #5
    right sorry about my engilish lol
    i put just a vtr engine and loom in kept my ecu key ect when we first tried to start it. it turned over very slowly like the battery was flat turned out the loom wasnt good anyway been drivein round init and bumping it to start it went to bump it the other day and got no fuel n no spark since then i have put the 1.4 loom on it turns over fine and fuel back but still no spark i have changed coil pack and checked my earths any ideas
  6. Saxperience Forum Bum Joined: Dec 2008 Lancs Posts: 4124 JP4S'd R.
    #6
    Wont run very good on a 1.4 ecu lol.

    did you remove the immobilizer box?

    or check crank sensor?
  7. Newbie Joined: Jan 2012 derbyshire Posts: 7 106 quicksilver with vtr engine in
    #7
    it ran spot on for 2 day no i didnt remove the immobilizer box and yer i checked that and replased it
  8. Newbie Joined: Jan 2012 derbyshire Posts: 7 106 quicksilver with vtr engine in
    #8
    bump .....