266MM Brake's

1. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

   #1 24th January 2012, 17:50

   Just bought these off ebay how easy are they to fit ?
   Also i got them for £55 with near new discs and pad's apparently, was this a good price ?
   
   
2. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

   #2 24th January 2012, 18:48

   Any1 ?
3. user_29491 Saxperience Forum Bum Joined: Dec 2008 Lancs Posts: 4124 JP4S'd R.

   #3 24th January 2012, 18:55

   They just bolt on the same as your's come off mate..
4. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

   #4 24th January 2012, 19:07

   no grinding then mate ?
5. user_29491 Saxperience Forum Bum Joined: Dec 2008 Lancs Posts: 4124 JP4S'd R.

   #5 24th January 2012, 19:12

   There will be abit of grinding, when you come to fit it will be obvious where fouls
6. user_29491 Saxperience Forum Bum Joined: Dec 2008 Lancs Posts: 4124 JP4S'd R.

   #6 24th January 2012, 19:13

   Here you go bud..
   
   http://www.106owners.co.uk/forums/sh...rmation-Thread
   
   full guide.
7. Furio-Gaz-Saxo Frequent Poster Joined: Jun 2009 Birstall, Batley Posts: 890 First Car - Saxo 1.1 Green 1997 97K Second Car -S

   #7 24th January 2012, 19:14

   Bit of grinding just to make them fit nothing major took me 30mins to fit them
8. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

   #8 24th January 2012, 19:28

   Thank's dont think ile be fitting myself dont trust myself with a grinder
9. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

   #9 24th January 2012, 19:41

   only needs a little taking off the side of the carrier so it fits up agains the strut properly.
   
   what wheels have you got?
   
   cause i had to take abit off the face of the caliper as it collided with the inside of the spokes on my 15" fondmetal wheels. they were ET11.
10. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

    #10 24th January 2012, 19:46

    Think these are the Bosch type1, just looked and apprently dont need grinding?
    But VTS Rim's mate
11. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

    #11 24th January 2012, 19:48

    think they all require grinding on the carrier, if not then thats as bonus.
    
    ah they will be fine under vts wheels thats what i had before.
12. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

    #12 24th January 2012, 19:59

    Thank's then might give it a try fitting and grinding myself then
13. DanTvts Established Member Joined: Mar 2011 Torbay Posts: 1285 Mauritius Vts, 206 Gti 180

    #13 25th January 2012, 00:27

    They look the same as mine, didn't need to grind anything on them, if you have got a picture of the back of them i could tell you whether they need grinding or not.
14. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

    #14 25th January 2012, 14:45

    Well they havnt came thru yet, im waiting for the seller to tell me if the bleed niples are freed up becuase im not sending money if they aint lol.