Immobiliser problem

1. PeteA Newbie Joined: Jan 2012 Posts: 1

   #1 29th January 2012, 17:34

   Hi guys,
   
   New here and, have a problem with my Saxo 1.4 immobiliser.
   
   Had a problem with starting the car, replaced coil pack with no change.
   
   I was then told to try disconnecting the battery, reconnect with the ignition on and all will be fine.
   
   I tried this and, it worked BUT, every time I lock the car, I have to go through the remove battery procedure to get it to start again.
   
   Does anyone know what I need to get to sort this problem out or, is it possible to bypass the immobiliser completely.
   
   Here's hoping.
   
   Pete
2. benaxvtr L-plater Joined: Sep 2010 Posts: 44

   #2 31st January 2012, 12:06

   disconnect the immob box behind the dash
3. benaxvtr L-plater Joined: Sep 2010 Posts: 44

   #3 31st January 2012, 12:06

   Quote:

   Originally Posted by benaxvtr disconnect the immob box behind the dash

   (when the car is running obviously)
4. billy-vts Infrequent Poster Joined: Jan 2012 wolverhampton Posts: 103 Saxo vts :)

   #4 31st January 2012, 22:09

   wher is the immobilliser? i have a 51 vts and have same problem?
5. adamspencer Infrequent Poster Joined: Feb 2012 Posts: 173 52 Saxo Desire 1.1

   #5 8th February 2012, 12:36

   immobiliser usually located in passenger side glovebox underneath the tray or at the back; may differ for vts as im going off standard saxo's. Small black box
6. adamspencer Infrequent Poster Joined: Feb 2012 Posts: 173 52 Saxo Desire 1.1

   #6 8th February 2012, 12:37

   unlocked ecu can also bypass the immobiliser, but if you can get it running unplug it as said above, pointless shelling out for ecu if it will start at least some of the time