adjusting angels

1. OMGASAXO Established Member Joined: Dec 2011 Derby Posts: 1021 Posi saxo, flatty, Peugeot bipper, Vauxhall vectra

   #1 10th May 2012, 22:24

   cant work out how to adjust the angel eye main beam is it this gold pole comming out of the white thing? and if so do i need a special tool cause the white thing wont turn and the metal pole cant be done bye hand lol
   
   
   also should the beam go up at the left side like this.. ?
   
   
   cheers
2. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

   #2 10th May 2012, 22:43

   My angels look the same, and turning anythink on the back of the light never worked. So when mot came about the tester had to reposition the whole light.
3. OMGASAXO Established Member Joined: Dec 2011 Derby Posts: 1021 Posi saxo, flatty, Peugeot bipper, Vauxhall vectra

   #3 10th May 2012, 23:22

   Is your beam dead high on the left and flat on the right like mine?
4. Stefan_Wood Established Member Joined: Sep 2011 Birmingham Posts: 1557 Furio, 306Hdi, Astra 1.9cdti

   #4 10th May 2012, 23:26

   Yes mate
5. OMGASAXO Established Member Joined: Dec 2011 Derby Posts: 1021 Posi saxo, flatty, Peugeot bipper, Vauxhall vectra

   #5 10th May 2012, 23:37

   Okay thanks think I need some better bulbs then lol
6. daveymac Regular Poster Joined: Oct 2008 Gateshead Posts: 429 Icelandic MK2 VTR

   #6 11th May 2012, 14:19

   In the 1st picture in the bottom left there's a little round silver thing. Think that's to adjust the beam.
   
   Sent from my HTC Desire S
7. OMGASAXO Established Member Joined: Dec 2011 Derby Posts: 1021 Posi saxo, flatty, Peugeot bipper, Vauxhall vectra

   #7 11th May 2012, 15:55

   the little round silver thing turns them left and right not up and down but i tried it and nothing happens
8. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

   #8 11th May 2012, 15:59

   my beams exact same on my angels, apparently fine, goes higher on the left so as not to dazzle on coming traffic...
9. OMGASAXO Established Member Joined: Dec 2011 Derby Posts: 1021 Posi saxo, flatty, Peugeot bipper, Vauxhall vectra

   #9 11th May 2012, 20:31

   Well it's one annoying beam pattern and useless on dark roads like the a38 lol
10. AaronSAXOVTR Regular Poster Joined: Sep 2011 Stowmarket/Ipswich Posts: 439 Slammed Silver 52 VTR

    #10 11th May 2012, 20:43

    you need to mount the adjuster on the back where the white bit is did this on mine
11. OMGASAXO Established Member Joined: Dec 2011 Derby Posts: 1021 Posi saxo, flatty, Peugeot bipper, Vauxhall vectra

    #11 12th May 2012, 00:56

    no idea how lol
12. AaronSAXOVTR Regular Poster Joined: Sep 2011 Stowmarket/Ipswich Posts: 439 Slammed Silver 52 VTR

    #12 12th May 2012, 08:48

    Quote:

    Originally Posted by OMGASAXO cant work out how to adjust the angel eye main beam is it this gold pole comming out of the white thing? and if so do i need a special tool cause the white thing wont turn and the metal pole cant be done bye hand lol

    you have to pull out that white bit of plastic, then take the beam adjuster off your old headlight and slot it into the hole. there is a bit sticking out of the adjuster which you have to slide it onto a rail in the head light then you plug it in and it will adjust it
13. OMGASAXO Established Member Joined: Dec 2011 Derby Posts: 1021 Posi saxo, flatty, Peugeot bipper, Vauxhall vectra

    #13 12th May 2012, 20:47

    Thanks, i gev it ago but just cant budge the white thing lol ill just live with how it is