Racebit induction kit help

1. Trezz Newbie Joined: Jul 2012 Posts: 9

   #1 14th July 2012, 17:22

   Hi people, looking to get this for my V reg VTR
   
   http://www.ebay.co.uk/itm/Citroen-Sa...#ht_1362wt_952
   
   problem is there is nowhere for the hose running from filter to throttle body to go. Has anyone modified this is anyway to make it work and how good is the actual part?
2. Trezz Newbie Joined: Jul 2012 Posts: 9

   #2 15th July 2012, 18:44

   anyone?
3. user_52446 Established Member Joined: May 2011 Norwich Posts: 1430 Forteee & Furiooooo

   #3 15th July 2012, 19:31

   Trezz mate, wondered what you meant when on the phone to you.
   But when I dont my furio to VTR inlet conversion I read that the pipe what your on about needs to be plumbed back into the induction kit. So what I would say (anyone correct me if wrong) is get that in the link you posted, run the pipe from inlet to the steel pipe in link then get a oil breather filter for the pipe coming of the rocker cover
   http://www.ebay.co.uk/itm/Universal-...item2a0e92cca9
4. Trezz Newbie Joined: Jul 2012 Posts: 9

   #4 15th July 2012, 20:06

   Was thinking about doing something like that... you reckon that the pipe will be the right size to connect onto the induction kit? Also is the 16mm oil breather the right size for the VTR?
5. user_52446 Established Member Joined: May 2011 Norwich Posts: 1430 Forteee & Furiooooo

   #5 15th July 2012, 20:13

   Quote:

   Originally Posted by Trezz Was thinking about doing something like that... you reckon that the pipe will be the right size to connect onto the induction kit? Also is the 16mm oil breather the right size for the VTR?

   Well either way you can just clamp it down with a jubilee clip. and the oil breather im not sure about, should be alright, when I had my white saxo I cut the original pipe coming of the rocker so it would fit then again used jubilee clips, sure someone can recommend an acutally "mm" size if you dont want to do that, not hard though
6. Trezz Newbie Joined: Jul 2012 Posts: 9

   #6 15th July 2012, 20:20

   Cheers mate think ill do that
7. user_52446 Established Member Joined: May 2011 Norwich Posts: 1430 Forteee & Furiooooo

   #7 15th July 2012, 21:17

   Quote:

   Originally Posted by Trezz Cheers mate think ill do that

   Thats what I did, Got a little bit of scrap pipe, jubilee clipped it to the original bit, then jubiliee clipped the breather to pipe. Now I think about it I dont no why I didnt jubilee clip it straight to the original pipe after I cut it
8. Trezz Newbie Joined: Jul 2012 Posts: 9

   #8 15th July 2012, 21:19

   you got a picture?
9. user_52446 Established Member Joined: May 2011 Norwich Posts: 1430 Forteee & Furiooooo

   #9 15th July 2012, 21:29

   Quote:

   Originally Posted by Trezz you got a picture?

   Best pic I can find, you can kinda see. People slat my big white pipe I love it