rocker cover help!

  1. #1
    is they a special way that the rocker cover goes on just finding it tricky to put back on?
  2. #2
    Vtr i assume? And put the splash plate on, then the spacers, then with the gasket already on the rocker cover kinda hook one side over then the other, make sure that you dont tilt the splash cover so much the spacers fall off... Other than that just wiggle away

    Sent from my GT-I9100 using Tapatalk 2
  3. #3
    loosen the coil pack and its piece of piss to get on with the above
    1 user thanked this post:
  4. #4
    As said above loosen the 2 10mm nuts holding the coilpack on it makes it way easier.
  5. #5
    is the coil pack the thing just behind it ?
  6. #6
    Yup big long black thing with 2 10mm nuts each side of it
  7. #7
    do i take it off, or just lose the bolts?
  8. #8
    Make sure you`ve got the metal spacers in the right order & that the baffle isn`t warped/on upside down mate.
  9. #9
    thanks for all replys, gunna go try now

    will let you all no how i get on
  10. #10
    done it now, finally got it on
  11. #11
    put the splash plate on, then the spacers, then with the gasket already on the rocker cover kinda hook one side over then the other, make sure that you dont tilt the splash cover so much the spacers fall off , just be patient
  12. #12
    done it now anyway. thanks