16 oz titan problems

1. n50pug Infrequent Poster Joined: Dec 2011 Posts: 166

   #1 16th August 2012, 19:45

   as above says am pulling my hair out with these wheels i know for a fact they came off a saxo as it was on my mates saxo first of all got a set of bolts of ebay because i didnt get bolts with it and they sent the wrong 1s so they sent another set that fitted they are 65mm long with a taper on them and 40mm thread length on them the spacer on the back of the ozs is 20mm had wheels all balanced before i treid them the.the front is a struggle to get them over the hole in the hub but i got them on the back was okay but they just dont feel right on the car and front drivers side came slack
2. medz_vtrturbo Established Member Joined: Jul 2007 anglesey Posts: 1055 saxo vtr turbo

   #2 16th August 2012, 19:59

   you need 5mm spacers aswel
3. n50pug Infrequent Poster Joined: Dec 2011 Posts: 166

   #3 16th August 2012, 20:34

   do i they have a big 20mm spacer the clicks into the back of them and am sure that was what my mate had on it
4. n50pug Infrequent Poster Joined: Dec 2011 Posts: 166

   #4 16th August 2012, 20:45

   any help would be great
5. medz_vtrturbo Established Member Joined: Jul 2007 anglesey Posts: 1055 saxo vtr turbo

   #5 16th August 2012, 21:05

   yes i believe so. needed on mine anyway
6. n50pug Infrequent Poster Joined: Dec 2011 Posts: 166

   #6 16th August 2012, 21:22

   what wheel nuts did u use i think it must b my wheel nuts just tried a 5mm spacer on it and that makes it a 25 mm spacer on it now the nut disna seem to catch much am going to phone oz tomorrow ans see what there saying