Window tinting fun!

14th August 2006, 10:49

Had the windows on my VTR tinted a few weeks ago £150 for 13% on the backs and whatever the max is you can have on the front.

Anyway, after a few days I noticed lines in the front windows both sides. They weren't that noticable so I didn't bother doing anything about them but after a few weeks they got so obvious and you could actually feel them if you ran your nails over the glass. (they're vertical lines by the way).

So i called the guy who tinted them for me and he told me he'd never had that before and to bring them back and he'll sort them (he just re-tinted them for me for free) but what he's said is the seal on the inside of the glass (not sure if it's a seal but whatever the thing is at the top of the door that the window touches when it slides up and down) is made of plastic and not felt like most cars so that's what's scratching the windows up.

So now I've got to replace that seal on both sides before I can open my windows again! He did clean up the seals before putting them back on but I've tried opening my windows slightly and it's still scratching the tint.

Anyone got any ideas where I can get replacements with felt or any ideas of something I can stick on the old ones???

Cheers guys, this is driving me nuts!

14th August 2006, 10:55

Yes mate I got told this. You need to get Renault clio ones as the saxo ones do not have a filter unlike the clio ones that doo. It will trap the dirt and stop dirt from scratching the film.

14th August 2006, 11:05

Cheers, that's handy my mate works for renault might get em free

, what clio? The new one or the old one?

14th August 2006, 11:07

Not too sure as I have not got my windows tinted. Best to ask your mate as he will most probably know. I would guess the newish one. Let us know how you get on tho.

14th August 2006, 11:11

Just gave him a quick call n he's gonna let me know so I'll post up here when I do.

Dunno if you had the rain where you are but everywhere flooded here yesterday, the renault workshop is totally underwater! lol

14th August 2006, 11:25

lol Yea man had rain but just short hard bursts of it. I was trying to do my car in it but no love coming back. Didn't rain enough to flood tho.

14th August 2006, 11:33

Basically... the strips/seals on Saxo's and 106's are 100% plastic. If dirt or grit becomes trapped, it will then be pushed against the film and in time will make scratch lines on the film. To prevent this from happening, take a trip to your local scrap yard and take two strips/seals from a Renault Clio (e.g. M-reg onwards). The Clio strips/seals are (should be) direct replacement for the Saxo ones. The reason why I said 'should be' is that when I put them in Mike's (MikeCracknell) car, I had to trim about an inch of them. My ones went straight in. It might be dependant on which model Clio you take the seals from.

14th August 2006, 13:29

I took 2 from an M reg Clio. It solved the problem. Cost me like 3 quid from a scrap yard. Had to retint the front windows thou as a result of the scratched tints!

14th August 2006, 13:32

Problem solved now. Scrappies can be your best friend. Although I have told a few other people about this, yours is the one that I have heard a response from ie did it. Enjoy scrape free tint windows.

14th August 2006, 20:12

Quote:

Originally Posted by droopster

yours is the one that I have heard a response from ie did it.

Ay? A lot of people have "done it".

3rd September 2006, 17:17

Ok I started this thread ages ago but anyway, finally got my windows sorted.

Went down my local scrappy and got 2 door seal bits (whatever they are) off an M reg clio. I had to cut a bit off of each end to make them fit but other then that they went on fine. While I was getting them though one of the blokes that works at the scrappy said to me he tints windows and uses some sort of a felt tape to just cover the standard saxo ones. So that could be worth a try if you want to avoid cutting clio ones up.

Personally I'd rather just fit the clio door bits though incase the felt should come unstuck.

3rd September 2006, 22:33

I need to sort my driverside seal, everytime I wash the car I get it lovely window goes down upon returning big wet lines which stain the newly cleaned window.

3rd September 2006, 23:23

Quote:

Originally Posted by alloyman

one of the blokes that works at the scrappy said to me he tints windows and uses some sort of a felt tape to just cover the standard saxo ones.

WTF?? You have scrappy owners who are civilised? The ones I've spoken to in the past have either been 99% brain dead or plain obnoxious! Lucky you!

3rd September 2006, 23:49

well im not very civi coz you get the most of the twats that roam this planet down at my work and they dont know what the fuck the talk about and dont even read about it b4 coming asking about what the want,so no-most are fine but if they have a bad day and belive me its allday long then of course its not your fault but like i said its not theres eva its the morons