1997 1.4SI Saxo Automatic.
Failed it's MOT as rear brake cylinders were leaking and contaminated the brake linings.
I replaced the cylinders and linings but when I put it all together and went to road test it I found that the front brakes were now virtually useless. When I press the brake pedal I can feel the rear brakes working and the rear of the car goes down before the front brakes connect but barely work.
I have checked the front pads are moving in the calipers and copper greased all moving parts. I have also tested the servo and bled the entire system again. I followed the correct bleeding pattern.
I'm now stumped as to what the problem could be as I didn't touch the front brakes at all before the problem arose.
Any ideas would be welcome.
Failed it's MOT as rear brake cylinders were leaking and contaminated the brake linings.
I replaced the cylinders and linings but when I put it all together and went to road test it I found that the front brakes were now virtually useless. When I press the brake pedal I can feel the rear brakes working and the rear of the car goes down before the front brakes connect but barely work.
I have checked the front pads are moving in the calipers and copper greased all moving parts. I have also tested the servo and bled the entire system again. I followed the correct bleeding pattern.
I'm now stumped as to what the problem could be as I didn't touch the front brakes at all before the problem arose.
Any ideas would be welcome.
