Furio Emmissions Fail - With Print Out. (HELP)

1. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

   #1 24th November 2012, 11:33

   hi guys, the other halfs furio fail MOT on emmissions the other day, bloke said it needs a cat? ive ordered a cat but not sure if any of the lambda sensors need changing?
   
   heres the print out:
   
   
   
   in regards to mods it has a 4-2-1 with the green plugged lambda plugged in and fitted to the manifold, then i fitted an underfloor cat and the blue plugged lambda is plugged in but just tied up in the bay to read clean air and not connected to the exhaust due to no hole to fit it lol.
   
   the cat however was off a scrap car so probably nackered when i fitted it but was free so had to give it a go.
   
   ive got a brand new VTS underfloor cat on the way so will this solve it or are any of the sensors nackered from those readings in the picture?
   
   any help will be much appreciated!
   
   cheers.
2. user_56874 Infrequent Poster Joined: Jan 2012 Leicestershire Posts: 246 Saxo VTR 02 reg Mitsubishi Evo 8 VW Passat

   #2 24th November 2012, 11:40

   Quote:

   Originally Posted by rick_VTR hi guys, the other halfs furio fail MOT on emmissions the other day, bloke said it needs a cat? ive ordered a cat but not sure if any of the lambda sensors need changing? heres the print out: in regards to mods it has a 4-2-1 with the green plugged lambda plugged in and fitted to the manifold, then i fitted an underfloor cat and the blue plugged lambda is plugged in but just tied up in the bay to read clean air and not connected to the exhaust due to no hole to fit it lol. the cat however was off a scrap car so probably nackered when i fitted it but was free so had to give it a go. ive got a brand new VTS underfloor cat on the way so will this solve it or are any of the sensors nackered from those readings in the picture? any help will be much appreciated! cheers.

   Go Dynodaze for an MOT
3. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

   #3 24th November 2012, 13:17

   thanks for the help much appreciated.
4. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

   #4 24th November 2012, 21:16

   
5. welshpug Saxperience Forum Bum Joined: Jul 2010 South Wales Posts: 3078 ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.

   #5 24th November 2012, 21:23

   plug both lambdas in, job done.
6. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

   #6 24th November 2012, 21:43

   they are both plugged in.
7. user_34323 Saxperience Post Whore Joined: May 2009 ringwood Posts: 6305 suzuki swift 1.2 sz3

   #7 24th November 2012, 21:55

   Most likely the cat, which on a furio isn't cheap.
8. welshpug Saxperience Forum Bum Joined: Jul 2010 South Wales Posts: 3078 ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.

   #8 24th November 2012, 21:58

   Quote:

   Originally Posted by rick_VTR they are both plugged in.

   
   
   into the ruddy exhaust
9. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

   #9 24th November 2012, 22:01

   my old VTR passed with the second one out of the exhaust so shouldnt need it plugged in on this, plus, there is no hole in the exhaust to screw the second one in.
   
   i will try it with the new cat on and if it fails still then can only be the 1st lambda sensor surely.
10. rick_VTR Saxperience Forum Bum Joined: Jun 2011 Abermule, Mid Wales. Posts: 2763 Corsa Rally Car & Fiesta ST

    #10 17th December 2012, 21:36

    forgot to update this.
    
    car passed with a brand new VTR underfloor cat and fitted a new standard silenced centre section and back box. the cat was an ebay job at about £40 so probably need another one come next year but i will get over it.
    
    centre section was £19 delivered brand new and back box was £23 delivered brand new.
    
    cant complain