Hi, right about 3 months ago one of my drive shaft's cv's went so i replaced both of the drive shafts and ever since i have had a slight dull thudding noise that changes with speed and does not mater if the engine is on or not as long as the cars moving
over the last few days its got considerably worse and now im getting this fairly harsh thudding noise through the car, it doesn't make a diff weather cornering or going straight, accelerating or decelerating no difference at all.
when i jack the car up and turn the front wheel's i get a sound almost like a coil spring pinging or something preloaded, this is especially bad on the drivers side, and also does it on the passenger side but no where near as bad
so im a bit stumped as to what it is :/
although i have a bad feeling its the dif
the car is lowered 50mm on grpN's this was done after the shafts were replaced but the noise has been there since fitting the shafts
background info on the car
its a 2002 vtr
2 new drive-shafts about 2 months ago (made by J&R)
both from wheel bearings about a year ago (15,000 miles high quality used)
passenger front hub
new rear axle + hubs 2 months ago no noise at all so not the rear
I have done all the work, and haven't badged any thing
car's costing me a fortune
any help would be good
over the last few days its got considerably worse and now im getting this fairly harsh thudding noise through the car, it doesn't make a diff weather cornering or going straight, accelerating or decelerating no difference at all.
when i jack the car up and turn the front wheel's i get a sound almost like a coil spring pinging or something preloaded, this is especially bad on the drivers side, and also does it on the passenger side but no where near as bad
so im a bit stumped as to what it is :/
although i have a bad feeling its the dif
the car is lowered 50mm on grpN's this was done after the shafts were replaced but the noise has been there since fitting the shafts
background info on the car
its a 2002 vtr
2 new drive-shafts about 2 months ago (made by J&R)
both from wheel bearings about a year ago (15,000 miles high quality used)
passenger front hub
new rear axle + hubs 2 months ago no noise at all so not the rear
I have done all the work, and haven't badged any thing
any help would be good