fuel line location

1. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

   #1 27th March 2013, 12:46

   any 1 know where the fuel rail line is supposed to go on my vts as cant find where it goes as its making my car sound very bad when idling
   
   its the fuel line return pipe has come off and cant see where it goes
   
   [QUOTE=morgansvts2000;6275261]its the fuel line return pipe has come off and cant see where it goes, i meant to say
2. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

   #2 27th March 2013, 13:08

   it has come off the rail?
   
   look underneath your inlet manifold for a long piece of plastic with two big nipples and pipes attatched, the return pipe is the second one from the left.
3. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

   #3 27th March 2013, 13:21

   thanks mate will av alook for that now, il let u know if i find it or not
4. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

   #4 27th March 2013, 13:24

   no worries, it will be very obvious once you've seen it, especially with a loose fuel pipe !
5. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

   #5 27th March 2013, 13:38

   i cant find it like, so il load up some pics now if i can off my mob, n i just found a clip that isnt connected and cant find where that goes either plus a pipe on the throttle body that doesnt go anywhere either, cause im new to saxo's i dnt av much knowledge about em
6. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

   #6 27th March 2013, 13:48

   get a few photos and i will see if i can help, spent a lot of time under the bonnet of my shit bag vts so have an idea of what should go where.
7. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

   #7 27th March 2013, 13:55

   iv got pics but cant seem to upload them now
8. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

   #8 27th March 2013, 13:59

   http://www.saxperience.com/forum/sho...d.php?t=271487
9. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

   #9 27th March 2013, 14:04

   just insalling it on my phone shouldnt take too long
   
   
   
   
   
   
   
   about time too hahaha
10. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

    #10 27th March 2013, 14:22

    that is the FPR pipe.
    
    it should go from underneath the inlet manifold to the rail, but it is already connected to the inlet, in your first photo, far right hand side there looks like a metal disk, that is the fuel pressure regulator on the end of your fuel rail. it has a nipple, connect the pipe to it.
11. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

    #11 27th March 2013, 14:27

    will do now thanks mate
    
    i av found a nipple rite on the bk of the fuel pressure ip that it cause the pipe is too short
    
    its already connected to the fuel rail nipple but its just hanging there
12. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

    #12 27th March 2013, 14:55

    is it 1 or 2 pipes? as in 1 pipe from inlet and 1 pipe from fpr
    
    as the pipe looks easy big enough in pic 1 and too short in pic 2 :$
13. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

    #13 27th March 2013, 15:03

    so its just connecting them both together with a connector n, will this stop my car from bein a pig
14. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

    #14 27th March 2013, 15:06

    no just take one pipe and connect it to where the other pipe was connected
    
    ie inlet to fpr, one solid pipe. it should stretch easy.
15. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

    #15 27th March 2013, 15:07

    its 2 pipes 1 as u say the fpr pipe and 1 from the throttle body
    
    il av a blast of that nw
    
    is the inlet where the 16v is or is the plastic bit under the fuel rail cause iv found a nipple on the plastic where the fuel rail sits
16. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

    #16 27th March 2013, 15:47

    inlet is 2 parts on 16v the nipple is connected to the pipe already as i can see it in picture 2 take that pipe and connect it to the nipple on the fpr pipe.
17. morgansvts2000 Newbie Joined: Mar 2013 maesteg Posts: 17

    #17 27th March 2013, 15:58

    iv done that, when i was looking for my socket i felt another nipple under the inlet where it connects to the block and got a bit confused, thank you mate for ur pationts and help very appriciate it