Torx socket size VTR head bolts.

1. Old_Drew Newbie Joined: Mar 2013 NORTHUMBERLAND Posts: 3 2002 SAXO VTR

   #1 14th April 2013, 17:24

   Hi all, does anyone know the size of the torx socket i need to remove & fit head bolts on my vtr
2. Bobo0907 Frequent Poster Joined: May 2010 North East Scotland Posts: 686 Inferno 182, S2 Indigo Rallye

   #2 14th April 2013, 17:26

   E14 is what you need. Better to buy a set though, surely?
3. Old_Drew Newbie Joined: Mar 2013 NORTHUMBERLAND Posts: 3 2002 SAXO VTR

   #3 14th April 2013, 17:32

   Thanks for that Bob, will buy tomorrow and start job and see what i can break.
4. stigsdump Infrequent Poster Joined: Jan 2013 Posts: 134

   #4 15th April 2013, 00:05

   you'll also need a angle dial guage to re-tighten the new ones in addition to a torque wrench
5. axsaxoman Saxperience Forum Bum Joined: Jan 2003 Scotland Posts: 3380

   #5 15th April 2013, 09:36

   20nm,s first ,then 240degrees rotation
6. Gandi699 Saxperience Post Whore Joined: Apr 2011 Posts: 9100 Amazon green VTR 16v, Inferno RS clio 182

   #6 15th April 2013, 09:44

   As above, although I did it 120 degrees on all in order first and then 120 on all again?
7. Old_Drew Newbie Joined: Mar 2013 NORTHUMBERLAND Posts: 3 2002 SAXO VTR

   #7 17th April 2013, 10:35

   Thanks for the info job done but now it won't start. Not even trying to turn over just alot of clicking noises from ecu area.
8. Gandi699 Saxperience Post Whore Joined: Apr 2011 Posts: 9100 Amazon green VTR 16v, Inferno RS clio 182

   #8 17th April 2013, 11:04

   wires on the starter correctly? I
9. AlexBp West Midlands Joined: Dec 2007 West mids Posts: 23149 Supra,civic GL

   #9 17th April 2013, 12:16

   Or a bad earth to something like the gearbox/chassis
10. stigsdump Infrequent Poster Joined: Jan 2013 Posts: 134

    #10 17th April 2013, 21:25

    flat battery with doors being left open and interior light draining battery....try jump leads and see if it turns over then