VTR Gearbox/Clutch Bearing Noise

  1. Newbie Joined: Jan 2012 Posts: 3
    #1
    Hi all,

    A hoping you knowledgable types can help me establish the cause of a horrendous noise that started emanating from my VTR on the way to work this morning!

    Firstly, it's a 2000MY VTR (facelift) and the noise in question would appear (based on much googling and reading of older threads) either a clutch release bearing or a gearbox bearing of some sort (input shaft bearing or dry internal bearing?) but I can't quite work out which.

    So, the noise only seems to start after the car is well up to temperature, it took about 10-12 miles of driving at dual carriage way speed to occur, nothing before, and about the same on the way home. It only seems to happen above30mph ish, based on some on the fly trial-and-error tests it doesn't seem to tally with engine speed, more roadworks wheel speed, I don't think it made a difference if clutch was in or out either.

    So, what do you guys think? Cutch release or some form of gearbox problem? Or something entirely different!

    If you need any more info just shout, I'll do my best to supply

    Thanks in advance!

    JB.
  2. Infrequent Poster Joined: Jan 2012 Guernsey, channel islands Posts: 132 2007 civic type r gt 1997 saxo vts (now dead) 2001
    #2
    When driving along push the clutch in, does the noise stop.

    Yes = clutch release bearing

    No = gearbox
  3. Newbie Joined: Jan 2012 Posts: 3
    #3
    thanks for the reply Misterk, from memory of the brief tests i did when i heard it the first time it didn't make a difference if clutch was in or out.

    Assuming it is gearbox related, what kind of job is it to fix? i'm assuming gearbox out, is this a major PITA and does anyone have any ideas which bearing it could be as i understand there are a few in the mix?

    thanks again,
    James.
  4. Saxperience Post Whore Joined: Apr 2011 Posts: 9100 Amazon green VTR 16v, Inferno RS clio 182
    #4
    how bad is this noise? If its anything gearbox or clutch related the box has to come off anyway.
    My brand new valeo release bearing makes a bit of a noise to be honest
  5. Established Member Joined: Feb 2011 Rochdale Posts: 1896 mk2 saxo 1.4 furio in possi blue
    #5
    sounds like a wheel bearing other than the getting up to temperature when it starts part.
    if you can get the car jacked up onto axle stands both sides at the front. get the engine running and go up threw the gears.
    now get out the car, and where safe to do so have a look underneath and a listen for the noise. see if you can locate where its coming from, if you can also get a video of the noise on post it up on here
  6. Newbie Joined: Jan 2012 Posts: 3
    #6
    Hi all,

    Cheers for the input, my mechanic said it could be a wheel bearing too so the car is in with him for diagnosis today - ill report back when I know what it is

    Thanks again,
    JB.