Airbag diagnostics report need help with correcting faults.

  1. #1
    Hi guys ok got myself a lexia 3 diagnostic kit which im pritty impressed with. One of the major reasons for it was to detect and find out where in my airbag system is failing. long story short had a crash about a year ago and after getting it fixed and read usable again the airbag light keeps flashing on the dash. Had it scanned for faults once before which came up with both pretentions had discharged. So replaced them and the light is still flashing. Below are some screenshots of the faults i picked up with the lexia:








    Going by the faults whats exactly is wrong or what needs replacing? When i looked at it seems to be more than one thing.

    Any input is great thanks

    Also i cleared the fault codes and rescanned but the same faults came up.
  2. #2
    Try renewing the airbag squib on the steering column,but 1st you could try what i`ve done which is to cut the connectors off off the orange wires(under the seats)I then re-attached using bullet connectors & the light operates as it should.
  3. #3
    Yeah ill try the connectiors as many say this cures alot of issues, they are aftermarket seats but the harness plugs have never changed. As for the the squible in steering coloum were exactly is it located because the only airbag squibles i was aware of was the steering wheel itself and both front seatbelts
  4. #4
    The squib is located behind the steering wheel mate(sorry for the confusion)