rims

1. morgan1501 L-plater Joined: May 2013 bury Posts: 51 Citroen saxo 1.0 liter year 2000

   #1 22nd August 2013, 16:22

   Hi all im thinkin of buying some alloys for my car there second hand and i dont know if they wil fir can anyone help The only number i can find on the add is PX4E 195/45R15 78V TUBEless steel belted radial.
   
   I dont wanna get wrong ones
   
   Chris
2. morgan1501 L-plater Joined: May 2013 bury Posts: 51 Citroen saxo 1.0 liter year 2000

   #2 22nd August 2013, 16:25

   There also four stud witch I want.
3. Jizanthapus Saxperience Forum Bum Joined: Mar 2012 Posts: 3593

   #3 22nd August 2013, 16:27

   Well, the tyres are the right size!
   
   Apart from that we have no way of knowing. You need to find out what car they came off and look up the PCd and centre bore measurements, then look up the same measurements for your car to see if they should fit.
   
   If you aren't sure what they came off then either measure the pcd and centre bore or try one on the car - that's all you can do
4. jasonmayall Established Member Joined: Mar 2011 Birmingham Posts: 2148 Rover BRM, Rover 800 Coupe, Mk6 golf.

   #4 22nd August 2013, 16:28

   Those are tyre sizes lol...
   
   Shall we start by you telling us what wheels are in question? We might be able to help a little more if we know what you're looking at
   
   Theres loads of different stud patterns, You should be able to get 'most' 4 studs to fit, even if not directly... through spacers or wobble bolts but then it gets expensive.
5. morgan1501 L-plater Joined: May 2013 bury Posts: 51 Citroen saxo 1.0 liter year 2000

   #5 22nd August 2013, 16:34

   They came off a nissan micra 51 plate. I dont hav a clue about thr bore or anything
6. morgan1501 L-plater Joined: May 2013 bury Posts: 51 Citroen saxo 1.0 liter year 2000

   #6 22nd August 2013, 17:01

   Offset ET35-ET45 stud 4x100 center bore 59.1mm for the nissan
   
   And mine is
   4x108 center bore is 65.1
   
   Does this sound right I dunno
7. Jizanthapus Saxperience Forum Bum Joined: Mar 2012 Posts: 3593

   #7 22nd August 2013, 17:46

   Quote:

   Originally Posted by morgan1501 Offset ET35-ET45 stud 4x100 center bore 59.1mm for the nissan And mine is 4x108 center bore is 65.1 Does this sound right I dunno

   Nope they are way off! Unless they are multifit??
   
   They need to be the exact same pcd (or within 2mm you can use 'wobble bolts' apparently)