Vems config, no start...

  1. Infrequent Poster Joined: Aug 2007 Netherlands Posts: 154 Saxo VTR '96(K.I.A.) Saxo 16V VTS '01
    #1
    For anyone with experience with mapping/vemstune/ or just a good idea,

    I'm new to using standalone engine management systems, so bear with me.
    The latest firmware is uploaded and TPS,WB02,MAP,AIT,CLT are calibrated.
    injectors tested (actuated and listend to clicking), ignition also checked (removed 4th and 3rd plugs and checked the sparks when actuated)

    Had some trouble with the trigger but then I've switched the polarity and now it seems a that I get a nice signal.
    (Doesn't display any faults like it used to)

    However I still can't get it to start...

    Is there anyone here with experience in Vemstune that could take a look at my log and config and tell me what I'm doing wrong?

    https://docs.google.com/file/d/0Bx5F...it?usp=sharing
    https://docs.google.com/file/d/0Bx5F...it?usp=sharing
    https://docs.google.com/file/d/0Bx5F...it?usp=sharing
  2. Saxperience Hardcore! Joined: Dec 2007 smurfland. Posts: 17346 Ex saxo owner.
    #2
    Put this in the performance section mate you`ll fet more response.
  3. Established Member Joined: Jun 2011 Bridgnorth (Shropshire) Posts: 2001 Jdm Dc2 Integra
    #3
    Gmc Motorsport (axsaxoman on here), or dp-engineering in holland will be your best bet mate

    I'm pretty sure gmc have mapped a saxo on a vems system before for a lad on here, and dp-engineering sell the ecu's too so both should be able to help I think
  4. Infrequent Poster Joined: Aug 2007 Netherlands Posts: 154 Saxo VTR '96(K.I.A.) Saxo 16V VTS '01
    #4
    Cheers mates!

    Found the problem, cranksensor was fubar.

    Now looking for a mapper to get it finetuned