Rear beam, is it shagged?

  1. #1
    Looks like I have a bit of camber, may be my drive, may be the wheels as they have 20mm spacers but what do you think? theres a rattle from the back right hand side aswell, sounds like a bolt rattling in its seat that is too small or something like that, but it has done that for about 10 months




  2. #2
    Have a look under the arch, how bigs the gap either side? (inner tyre to arch) as it looks fine to me

    jack it up and see if it has play
  3. #3
    The wheels have a bit of camber as standard anyway, to me from your photos that looks fine but you need to check for play first
  4. #4
    I think the rear bumper is deceiving also, as the lines make it look like camber, last time i had it in the air it had no play, but that was a while ago i will jack it up and have a look, just that rattle/tapping noise that occurs every so often from the rear right, usually over poor road surfaces, sometimes it doesnt rattle at all!
  5. #5
    Could be the arb plate loose slightly
  6. #6
    I did check that, tapped around to hear any rattles, and seemed solid, never tightened it up mind had no tools on me at the time, will have to give that a go as it was after it was lowered it i noticed it
  7. #7
    I would jack it up and feel for play.

    My old 1 failed its MOT for play in the bearings, was standard ride height and looked fine to the naked eye. Yet when it was jacked it, the play was very noticeable.