vtr clocks into a 106 quicksilver

1. fish6634 L-plater Joined: Sep 2006 Newton le willows Posts: 56 1998 Saxo VTR

   #1 17th May 2014, 17:36

   Hi all
   
   I have fitted some digital vtr clocks into my 106 quicksilver and was hoping to make use of the temp gauge. Everything works as it should apart from the temp gauge which moves slightly with the ignition and then will only read cold.
   
   My temp sensor and loom only have two pins on the green sensor and two wires on the loom/plug.
   
   Could someone have a look at their temp sensor (green) in their vtr please and tell me how many wires you have on your loom going to the sensor? And also how many pins on the plug/sensor please?
   
   Thanks in advance hopefully i can get the temp gauge to work!!
   
   ps is the oil pressure switch round the back of the engine because i get no oil light on ignition.
2. fish6634 L-plater Joined: Sep 2006 Newton le willows Posts: 56 1998 Saxo VTR

   #2 19th May 2014, 07:46

   Ok it will read halfway from cold and then works in reverse the hotter it gets the colder the gauge reads