Studs length on standard VTS wheels and 15mm spacers.

1. user_61020 Established Member Joined: Aug 2012 Posts: 2009 Saxò VTS 16v

   #1 8th September 2014, 22:04

   Taking into account the standard bolts length,spacers diameter and everything else 60mm should suffice from what I calculated,the correct amount of turns should be obtained from the wheel bolt when tightening the wheel back onto the vehicle this way,is that correct?
   
   Thanks.
2. user_61020 Established Member Joined: Aug 2012 Posts: 2009 Saxò VTS 16v

   #2 10th September 2014, 18:04

   Anyone please?
3. ghaz Infrequent Poster Joined: Aug 2014 Posts: 116 Rover 400 Citroen AX JDM Honda Integra

   #3 11th September 2014, 09:38

   Measure the standard bolts, add 15mm and then buy bolts that length, that must be correct?
4. user_61020 Established Member Joined: Aug 2012 Posts: 2009 Saxò VTS 16v

   #4 11th September 2014, 10:47

   The overall length of the standard wheel bolt is 52mm including the nut that blocks the wheel so i would guess the threaded part is around 22mm adding 15mm for the spacer and another 22mm of the thread for the nut to be tighten securely and comes at 59mm so 60mm stud as i said in the first post.