How do you remove the front bumper and manifold on a vtr 2002

  1. L-plater Joined: Sep 2014 Peterborough Posts: 79 99' Audi Static A3 02' VTR Turbo Saxo
    #1
    To guys, I'm new to the site, and need help. Iv orderedy new manifold for vtr and was wondering as to
    Go about removing the old one. As soon as I know the old one comes off I guess it's the same in reverse to put the new one on.

    Also Iv bought a new horn, mainly just because it sounds funny. As far as I can tell the only way to replace the horn is to remove the front bumper. But I have no idea as to how that comes off???

    Please help guys.

    Thank you,
    Codey
  2. Saxperience Hardcore! Joined: Dec 2007 smurfland. Posts: 17346 Ex saxo owner.
    #2
    The horn (original ones)Are held on by a bracket,so loosen off a nut and bolt unplug the horn.Refitting is a reverse.
  3. Established Member Joined: Aug 2012 Posts: 2009 Saxò VTS 16v
    #3
    You will be able to replace the horn trough the driver side fog light hole if you don't have these otherwise you might need to take the bumper off,there are 3 bolts underneath the front center of the bumper,1 on both side where the arch joins the bumper but you need to take off the splash guards to take these off,and 1 on both side directly below these last ones.
  4. Saxperience Hardcore! Joined: Dec 2007 smurfland. Posts: 17346 Ex saxo owner.
    #4
    Are vtr's different then from flat arch saxos as regards the horn fitment?As I did mine from underneath the car.
  5. L-plater Joined: Sep 2014 Peterborough Posts: 79 99' Audi Static A3 02' VTR Turbo Saxo
    #5
    cheers guys, i think ill have to take th bumper off as its a after market horn.

    How do i go abouts removing the manifold aswell??
  6. Saxperience Hardcore! Joined: Dec 2007 smurfland. Posts: 17346 Ex saxo owner.
    #6
    The manifold is reasonably simple to do,i'd buy a haynes manual mate as it explains it with pics.