Cluster calibration

  1. #1
    Hey guys

    So i have a MK1 Saxo 1.6 vts 8v from 99 and my analog cluster has issues. The temp gauge is not correct, speedo is a bit off and the fuell gauge is not correct. how can i calibrate this my self?
  2. #2
    already fixed it. I took out the cluster, took off the glass. connected and placed the cluster back without glass. Went for a drive to heat up the car and fill the tank up for 100%. at the gas station after refueling i set the car on contact. The needle for the fuel was more than 100% so i took the needle carefully off and placed it back on the full stripe. took out the key and a couple times to contact to make sure the fuel needle is correct.

    I know my car heats up normal so at 50% but it was at 75% soo after some driving took of the needle for the temp gauge and reput it on 50%. Speedo was different. took the speedo needle off used a GPS navigation to drive slow steady 40km/h while maintaining that speed on a abandoned road placed the needle on the 40km/h while driving. Thats all. than take it out and put it back togheter and place it back