Important! : dashboard problem

  1. #1
    I have been having some problems with the dashboard, temp rev and fuel gauges stop working only speedo work.


    I switched to a similar dashboard and the rev dont work and the hand brake light is always on.
    the fuel gauge it seems to be working well but bouncing a little bit.


    I do not know what else to do,
    if someone can help me I would appreciate it
  2. #2
    I have had the exact same problem. Only, in the reverse order.

    Rev counter doesn't work + handbrake light on.
    Then
    Rev counter doesn't work + handbrake light on + fuel gauge not working + temp gauge not working.

    Fuel+temp fixed by new clocks.

    The rev counter and handbrake light are still on.
    The handbrake light is also a general warning that something isn't right.

    Your fuel gauge, try earth the sender closer to the tank.
  3. #3
    I have had the exact same problem. Only, in the reverse order.

    Rev counter doesn't work + handbrake light on.
    Then
    Rev counter doesn't work + handbrake light on + fuel gauge not working + temp gauge not working.

    Fuel+temp fixed by new clocks.

    The rev counter and handbrake light are still on.
    The handbrake light is also a general warning that something isn't right.

    Your fuel gauge, try earth the sender closer to the tank.
  4. #4
    I can already see that is common to happen
    I will try to fix fuel gauge
    tanks for reply
  5. #5
    update
    I've tried everything and I still couldn't find the problem.
    I noticed now the warning sound no longer working when I open the door with the headlights on, if I remove the F1 fuse the warning sound work
  6. #6
    Quote:
    Originally Posted by HMoniz View Post
    update
    I've tried everything and I still couldn't find the problem.
    I noticed now the warning sound no longer working when I open the door with the headlights on, if I remove the F1 fuse the warning sound work
    You have a 1.5D, these don't work the rev counter the same way as a petrol model.

    However, you've narrowed it down to a problem with the circuit on Fuse 1.

    Fuse 1 is for the coolant control unit, tachometer, and the glow plug relay and warning lights.

    It sounds to me like you have a broken wire/earth in the dashboard wiring loom and it is back feeding down Circuit F1.

    Have you checked the dashboard earth at the base of the A pillar on the drivers side?

    Also, is there anything else that isn't working? Do the side lights work as normal? Do you have power at the cigar lighter socket?
  7. #7
    yes i already checked the earth points on both sides. but I haven't test yet if the wire is broken.

    tomorrow I will take out the dashboard end test the earth, if the earth is good I will remove wire by wire from the dashboard connector and I hope to find out which wire is causing this problem.

    but everything else is working well
    1 user thanked this post: