Driveshaft oil seal replacement.

1. leadsled Newbie Joined: Feb 2023 Posts: 2 2000 Saxo Forte 2000 Civic VTI

   #1 24th February 2023, 20:25

   Hello,
   
   I recently changed both driveshafts on my as the original ones were worn and knocking. I dropped the old oil and put in 2 liters of fresh 75W/80. Now there is a small leak coming from the gearbox where the shaft meets. I didn't change the oil seals although I should have done.
   
   Could someone explain the process of replacing them? And which ones I need to replace them with? Any help would be appreciated, thanks.
2. user_61020 Established Member Joined: Aug 2012 Posts: 2009 Saxò VTS 16v

   #2 24th February 2023, 21:20

   https://www.ebay.co.uk/itm/361997192830
   
   They just pry off,they might be a bit stuck if they are old,i found my small claw hammer works good,being careful not to score the surface,obliviously will need to take the driveshafts out and drain the oil.
3. leadsled Newbie Joined: Feb 2023 Posts: 2 2000 Saxo Forte 2000 Civic VTI

   #3 1st March 2023, 17:52

   All sorted now, it was a simple job. Thanks for the advice VeiRoN.