FSE Power Boost Valve

27th March 2004, 03:26

Hi People,

I have just got myself a FSE Power Boost Valve for my Saxo VTS MK1, but people are telling me they do nothing does anyone have one of these fitted and what they think of it so I can decide if I should install mine.

Many thanks

Jimmy

28th March 2004, 00:28

I also have a 97 VTS and I installed mine almost two years ago. I got it along with a WRC ram air induction kit and both of them along with my SuperSprint center and back box got me an awesome power jolt. About 8 sec to 100km and 230km max speed.

I think I got instant power and when I say instant I should include a photo of my front Potenza's and the way they lost their thred. Everytime I pressed the gas a little bit more...I got a spin.

If you wanna buy it buy a ram air kit and get it set on a rolling road...I live in a shithole like Macedonia and the rolling road is just a word I read on the net.

More POWER to us!

Alex

28th March 2004, 00:38

Hi Alex,

Ok thanks, i think i'll give it ago.

Jimmy

30th March 2004, 01:46

I have an FSE too, but thats as im needing a fair bit more pressure due to the turbo...

Be aware that the FSE doesnt appear to give consistent fuel pressure like the std regulators do... this could also be a factor in your juddering problem Alex?

30th March 2004, 03:15

Hi,

Do you normally get problems with this item ?

Jimmy

19th April 2004, 23:32

Alex, did you make a typo? If not, there's something wrong with your car...

The VTS does 0-62mph (100kph) in 7.7secs. So at about eight seconds, there's either no difference at all with all your mods, or it's actually slower than it should be - although your top speed is higher.

21st April 2004, 03:50

The stated time of 7.7 seconds or whatever isn't what you are really gonna get out of a car. That time is recorded by a proffessional driver thrashing the car to its limits to get the best time. You would never be able to get close at standard. So matching it shows an improvement in speed.

Check your car's listed 0-60 and se if you can match it

21st April 2004, 04:06

enbwo paul evans managed a 6.9 and a 6.7 in his standard stripped vts, though it had a full cage making weigh around the same. Timed with professional timing gear

22nd April 2004, 03:18

if it's stripped then it isn't standard so that would make a difference

22nd April 2004, 05:12

with cage weighing about 30 kgs, bring it back if not over standard weigh

25th April 2004, 00:07

Guys, Guys and Girl,

We never get the specs the factory sells us. i think that you need the perfect conditions, driver, fuel and lots more to get to that....with a standard car.

My 230kmph is is as accurate as my speedo...even though I did that with the standard 185/55-14 tyres. I know of a race on the highway where a VTS (now a former VTS) did a flat 250kmph which was measured with a Alfa 156 GTA. The VTS had only minor things done and was chiped...dont ask me how he did that.

I just put a set of Brock B2 Supercup SLC Chrome and some 195/45-15 SP9000's...the car drives like is glued to the pavement.

I have to check my specs though...

25th April 2004, 00:13

and yes....Simo!

Te constand fuel pressure from my FSE I can get if I take of the vacuum line from the top. Is that what you mean?

I also am thinking what to do with the OEM regulator. It is not connected to anyting and I dunno if that screws up something. The vacuum line goes from the intake manifold to the FSE. I think that I should get a T conector and bridge the vacuum to both FSE and OEM regulators.

What do you guys think? How are your FSE's conected?

Alex