rear lights

1. pure_sax Regular Poster Joined: Nov 2003 jersey channel islands Posts: 408 saxo VTR

   #1 7th January 2007, 20:36

   hey ppl,
   
   anyone help please,
   
   how do i split the lense off the unit (rear lights)
   
   then what do i use to stick it back together again?
2. hesslevtr Saxperience Hardcore! Joined: May 2004 Hull (England) Posts: 18709 1.6 vtr

   #2 7th January 2007, 20:38

   heat them up
   
   theres a guide on here how todo the front lights its basically the same
3. pure_sax Regular Poster Joined: Nov 2003 jersey channel islands Posts: 408 saxo VTR

   #3 7th January 2007, 20:40

   heat them up with wat?
4. spanair Frequent Poster Joined: Feb 2006 Enfield, Middlesex. Posts: 565 Saxo Rally Rep, 200SX S13 drift spec.

   #4 7th January 2007, 20:42

   The oven maybe a heat gun if you got one but imo the oven is much easier heat it up put it in there for 10-15 mins take it out and they will come apart very easily since the glue is soft. You can also use a heat gun I guess.
5. hesslevtr Saxperience Hardcore! Joined: May 2004 Hull (England) Posts: 18709 1.6 vtr

   #5 7th January 2007, 20:46

   Quote:

   Originally Posted by pure_sax heat them up with wat?

   heat gun
   hair dryer
   oven
6. pure_sax Regular Poster Joined: Nov 2003 jersey channel islands Posts: 408 saxo VTR

   #6 7th January 2007, 20:48

   hair dryer u sure that would work? ok then
7. spanair Frequent Poster Joined: Feb 2006 Enfield, Middlesex. Posts: 565 Saxo Rally Rep, 200SX S13 drift spec.

   #7 7th January 2007, 20:49

   It will work but it'll take a while longer since you only heat one part at a time instead of the whole unit in the oven, but yes to your question.
8. pure_sax Regular Poster Joined: Nov 2003 jersey channel islands Posts: 408 saxo VTR

   #8 7th January 2007, 20:53

   oven for me for sure,
   
   the reason y i ask is i got a hole in one some where not a clue where so i wanna take them a dry it up and then seal it back up,
   
   so wat sort of glue do i use?
9. spanair Frequent Poster Joined: Feb 2006 Enfield, Middlesex. Posts: 565 Saxo Rally Rep, 200SX S13 drift spec.

   #9 7th January 2007, 21:13

   If you mean glue to put them back on then the same glue that was there before once you take them apart with some care, if you mean to cover a crack/whole or whatever use some sealant.
10. pure_sax Regular Poster Joined: Nov 2003 jersey channel islands Posts: 408 saxo VTR

    #10 7th January 2007, 21:24

    sound..