Exhaust mounting bracket / support

1. faulknerm Infrequent Poster Joined: Jan 2007 Posts: 148

   #1 19th February 2007, 00:30

   On the OE backbox, the two 'prongs' (for attaching to the rubber hangers) were welded on.
   
   The backbox I intend to fit was originally bought for my AX, therefore it has it's prongs in different places (although they are not welded to the box, they are on removable rings).
   
   My question is, is it possible to get a removable ring/clip thing with the prongs in the correct place for a saxo? And if so, where from?
   
   Alternatively, can anybody recommend a cheap, good looking/sounding backbox which I could put on instead?
   
   Cheers,
2. hesslevtr Saxperience Hardcore! Joined: May 2004 Hull (England) Posts: 18709 1.6 vtr

   #2 19th February 2007, 00:32

   any exhaust centre should be able to help you out
   
   magnex or piper would be my choice of back boxes
3. riggsy Saxperience Post Whore Joined: Jan 2006 West Sussex Posts: 6280 Mk2 Saxo Vts

   #3 19th February 2007, 01:34

   Yeh magnex, piper, scorpion all sound nice
4. turbo_dave Infrequent Poster Joined: Jan 2007 Down south Posts: 105 E36 M3 3.0 & 2.1 Mondeo w/Eaton M62

   #4 19th February 2007, 22:33

   Most exhaust places will do a Volvo S40 back box repair piece, which is basically an exhaust U clamp with a hanger built into it.
   
   That, along with those nifty VW compensator/tube joiners should not be missing from any exhaust bodgers entourage.