where can i find the sticky on smoking fog lights?
smoking fog
-
#1
-
#2just search for smoking the headlights and apply same techneique with the fogs really mate!!
-
#3but im certain i read a thread last week with step by step instructions. just cant seem to find it
-
#4undo 3 bolts on each fog, its best to jack the car up or just park the car one side on the kerb so you can get to them, there a 10mm
unplug them and they should come out
once off mark were the adjuster is, its just to make sure the lights are alighned when putting them back on
once off heat up were there sealed and slowly and carfully prise the glass off, once off take the light out with reflector part, so you just have a plastic surround, sand it all down with a 1200 grit paper then mask up the groove were the glass fits into (makes the silicone a better bon on unpainted surfaces)
then its time for spraying
a few coats of plastic primer
a few coats of paint
and finally some laquer, but dont do this if you want more of a matt effect finish
leave a few days for the paint to harden, then put a bead of clear silicone in the groove and push the glass into it and keep secure with either tie wraps or elastic bands
leave a day
then assemble the light unit back on, and put the adjuster up to were you marked it
put back on car -
#5http://www.saxperience.com/forum/showthread.php?t=82938
for premium members
tbh you cant see the paint finish behind the glass as its not clear glass -
#6Noooo the guide was moved to the premium section for a reason... don't copy out my guide on here .....
Stop being lazy and sign up for premium membership...
Alex