Angel/Halo head lights

  1. #1
    has anyone got these and wired them up themselves?

    or do they normally come as a direct replacement?

    thanks
  2. #2
    Iv askes this there are threads on it have a search mate
  3. #3
    some choping of the side light wires is needed
  4. #4
    Take a look at the back of the angel eyes...

    There is one large plug for the headlights main beam.. that is a straight swap for your original headlight plug...

    The indicators, the bulb holder comes with the angel eyes... twist it and it comes out... then you can twist in the bulb... they are plug and play with your original indicator wires...

    You will have one loose wire that was originally connected to your electric beam adjuster motor... these are not needed, as angels are manually adjusted... so these can simply be taped up...

    You need to decide firstly whether you want to have your standard sidelight bulb fitted aswell as the halo rings and the LED.. if so you will need to take the holder out your original lights and put them into the angel eyes...

    Crimp the ends of the three red wires together.. and splice them into the positive (red) wire of the sidelights...
    Crimp the ends of the three black wires together and splice them into the negative (green) wire of the sidelights...

    Make sure you test all of the lights before fully securing them back into the car...

    Hope that helps!
    Alex
  5. #5
    guide up somewhere i read it once...
    you managed to get them sorted mate?
  6. #6
    I got some smoked angel eyes wired them up and everything, look cool.. the only thing is they come dipped towards the ground when you buy them and i dont know how to raise them up... coz i can't see s**t! can anyone help?!
  7. #7
    heres the guide:

    http://www.saxperience.com/forum/sho...l+wiring+guide
  8. #8
    yeh, iv'e wired them up fine i just need to tweak the height of the beam because its pointing at the ground?!
  9. #9
    i also have this same problem i have mark 2 angel eyes tho but i think they r facing the ground and i cant change the beam with the small control under steering wheel like u can with normal lights so would like to know how to change the height of the angel eyes light
  10. #10
    unfortunately i wont be able to get the lights i wanted. they were on ebay but i was just seeing how easy theyre to fit.

    ive just had to take my car to the garage and have a new part of an exhaust fitted! costing me a load! so i wont be able to afford the new lights now
  11. #11
    Polan - angel eyes are manually adjusted... they don't have motor adjusters like the standard headlights... they can be adjusted on the back of the headlight unit itself...

    Or alternatively get them adjusted when your car next goes in for an MOT or service

    Alex
  12. #12
    Don't spose which part on the rear of the light you adjust them with do you? because there is an adjuster but it only alter's it sideways? doing my head in
  13. #13
    On the back of the unit there should be two adjusters... they will both have arrows on them, hinting at left/right or up/down...

    I can't be any more specific than that as every make of angel eyes has a slightly different system..

    If you still dont understand take a picture of the back of your angel eyes... and i'll point out where they are..

    Alex