glove box handle!

1. Baynesey Established Member Joined: Sep 2005 canterbury, kent Posts: 1115 mk2 Vtr

   #1 13th August 2007, 15:39

   just a quick one,
   
   wanna spray it how do u get it off???
   
   had a go but worried im going to snap it!!!
   
   cheers in advance
   
   Dan
2. Rocko Frequent Poster Joined: Feb 2007 Swansea (South Wales) Posts: 558 Silver Saxo Furio 2000

   #2 14th August 2007, 00:38

   mate, you can't take it off.
   
   1. Open the glove box.
   
   2. There are 3 torx screw inside of the glove box door holding the hinge on.
   
   3. Unscrew them and gently take out the glove box door.
   
   4. Carefully mask the glove box door, making sure that the handle isn't masked, i used sandwhich bags with insulation tape, i found that to be the easiest option, but you can choose you own way (newspaper etc).
   
   5. Spray away.
   
   6. Obviously wait for it to dry .......
   
   7. Fit back into correct position before screwing the torx screws back in.
   
   8. Screw in torx screws.
   
   That's basically it.
   
   If you need anymore help, PM me mate !
   
   Good luck !
   
   REP PLEASE ?
3. Hewitt Frequent Poster Joined: Jun 2007 Swansea Posts: 726 Saxo Furio

   #3 14th August 2007, 00:40

   Thanks jus sprayted mine usin the guide well yesterday it adds much mor ecolour to the interior
4. lew15 Regular Poster Joined: Mar 2007 Stansted - Essex Posts: 418 MK1 1.1i SX

   #4 14th August 2007, 00:53

   on the same kind of topic... how on earth d you get the dash surround out? i took the steering wheel cover off, unscrewed the two torx screws but it still wouldn't budge.
5. Baz Saxperience Hardcore! Joined: Nov 2005 Coventry Posts: 17782 Fiesta ST150

   #5 14th August 2007, 00:58

   three is another 2 screws at the bottom, steering wheel needs to come off, you will need a T50 size Torx for that after taking the front off inc air bag
6. Baynesey Established Member Joined: Sep 2005 canterbury, kent Posts: 1115 mk2 Vtr

   #6 14th August 2007, 01:03

   o deary me! i must have broken it, i got the handle out , if i get it back in ill get some pics
7. blacksax1 Frequent Poster Joined: Mar 2006 oxfordshire Posts: 812 top of the range scort lol. yeah right

   #7 14th August 2007, 17:00

   Quote:

   Originally Posted by Rocko mate, you can't take it off. 1. Open the glove box. 2. There are 3 torx screw inside of the glove box door holding the hinge on. 3. Unscrew them and gently take out the glove box door. 4. Carefully mask the glove box door, making sure that the handle isn't masked, i used sandwhich bags with insulation tape, i found that to be the easiest option, but you can choose you own way (newspaper etc). 5. Spray away. 6. Obviously wait for it to dry ....... 7. Fit back into correct position before screwing the torx screws back in. 8. Screw in torx screws. That's basically it. If you need anymore help, PM me mate ! Good luck ! REP PLEASE ?

   yeah you can i have taken mine off loads of times. i just put a very this flat head screwdriver under the back and front of the handle and push up, eventually it will pop off, spray and then just push back on and it will click when its on properly.
8. Predator_R32p Super Moderator Joined: Mar 2003 Durham (England) Posts: 37932 1. AX 2. Mk2 Saxo VTR 3. MK4 R32 DBP

   #8 14th August 2007, 17:52

   i just masked mine all up instead of taking it all to bits, 3 torx screws off then take off mask up and spray simple as that