engine loom (wiring diagram)

4th January 2006, 03:34

does any body have a wiring diagram for a `99 vtr.
haynes manual should have it. i need the bit for the engine wiring and ecu. if somebody could scan it and e-mail it to me i would be chuffin...
thanx axhead

4th January 2006, 04:09

What is it you are looking for specifically???

4th January 2006, 05:39

Here's the full set.. for future reference peeps

4th January 2006, 05:50

bloody hell maybe needs to be made a sticky or put somewere were people can see

4th January 2006, 05:54

Thats why I edited the title, so people can search for 'wiring diagram'

4th January 2006, 06:03

ok big man never new that

4th January 2006, 06:26

nice one mate thats sound...

4th January 2006, 06:27

I do have a full ECU pin out somewhere, but I dont have my scanner setup... I grabbed the other diagrams from a PDF.

Let me know if you need anything else

4th January 2006, 19:54

where can i getta hold of a fuse box diagram, ive lost my haynes manual!

i need to change the fuse for my stereo from a 5a to 10a, thought u lot should know

sorry if ive posted in the wrong bit

4th January 2006, 19:59

your radio should already have a 10a fuse

4th January 2006, 20:01

i see...thanks

4th January 2006, 20:14

radio fuse 4, 10a

13th August 2006, 21:09

Quote:

Originally Posted by Simo

I do have a full ECU pin out somewhere, but I dont have my scanner setup... I grabbed the other diagrams from a PDF.

Let me know if you need anything else

any chance in that ecu pin out mate...

13th August 2006, 21:48

hold on mate.
i have a pin diagram

13th August 2006, 21:51

ooohhh yippeee.. gimme gimme

13th August 2006, 21:55

give me some time. i need to type each pin out

13th August 2006, 22:01

o.k.. cant you copy and paste/,., or is it on paper/..

14th August 2006, 22:18

forum went down last night so here it ie.

23-air con
32-air con
34-air con
18-battery
22-coded key pad
35-coded keypad
11-crankshaft position sensor-
30-crankshaft position sensor-
19-crankshaft position sensor-
13-data link connector
16-data link connector
6-data link connector
2-earth
14-earth
19-earth
25-engine coolant temp sensor
26-engine coolant temp sensor
5-evaporative emission canister purge valve
10-heated oxygen sensor
28-heated oxygen sensor
19-heated oxygen sensor
15-idle air control
33-idle air control
1-ignition coil
20-ignition coil
3-inertia fuel shut off
17-injectors
26-intake air temp
27-intake air temp
22-malfunction indicator lamp
7-MAP sensor
12-MAP sensor
26-MAP sensor
37-relay module
3-relay module
6-tachometer
12-TPS
26-TPS
29-TPS
9-vehicle speed sensor

fuck me, thats a lot of copying

14th August 2006, 22:22

#30 Battery +
31 Battery -
В54 Crankshaft position (CKP) sensor
Х1 Data link connector (DLC)
А35 Engine control module (ECM)
В24 Engine coolant temperature (ЕСТ) sensor
H63 Engine malfunction indicator lamp (MIL)
Y104 Evaporative emission (EVAP) canister purge valve
М12 Fuel pump
F Fuse
В72 Heated oxygen sensor (HO2S)
Y99 Idle air control (IAC) valve
Т1 Ignition coil
15 Ignition switch - ignition ON
А162 Immobilizer control module
S39 Inertia fuel shut-off (IFS) switch
Y3 Injector
А5 Instrument panel
A75 Instrumentation control module
B25 Intake air temperature (IAT) sensor
В69 Knock sensor (KS)
B83 Manifold absolute pressure (MAP) sensor
A171 Relay module
P7 Tachometer
R10 Throttle body heater
В147 Throttle position (TP) sensor
B33 Vehicle speed sensor (VSS)
P9 Vehicle speedometer

Thats the diagram from autodata that I used to do the VTr to VTS conversion

26th January 2007, 20:35

bloody good info here!
stuck

26th January 2007, 23:24

Quote:

Originally Posted by Sean

bloody good info here!
stuck

hurry up sean you only have a week now

26th January 2007, 23:27

lol i meant the thread has been stuck, not that i was stuck you fool

26th January 2007, 23:30

Quote:

Originally Posted by Sean

lol i meant the thread has been stuck, not that i was stuck you fool

pah il await our next convo on msn of help me it doesnt work

26th January 2007, 23:38

waiting a long time son

8th February 2007, 10:02

Added to FAQ list

4th March 2007, 11:46

hi do you have the pinouts for the other side of the harness for a mk 1 and mk2 vtr as i have just put a replacement mk 2 engine in my 97 mk1. cheers

24th May 2007, 19:51

AX beefy, that diagram you posted on page 1 is that showing a vtr car loom plugged into a vts engine loom via that circular plug that its behind the passanger headlight in the engine bay?

25th May 2007, 11:11

would also like to know the same

18th October 2007, 16:55

anything to do with PAS on here or am i just blind, good diagrams but not quite what im looking for from what i can see as ive got a rogue wore in my power steering. ( the trigger for the relay (GREEN))

21st October 2008, 22:19

can you post the wiring diagram for the mk2 vtr or are they the same??

14th January 2009, 08:06

hi mate i see you have loads of wire in diagrams you dont happen to have picture and whatthe wires do on the multi plugs for a mk1 vtr engine loom and the multi plug pics for a 106 xn 5 dr cheers bud

15th January 2009, 23:45

Hello everyone, does anybody know where i could get the wiring diagrams for a 2001 vtr engine code "nft" cheers.

17th February 2009, 22:15

long time without writing....well im megasquirting mi 00' saxo vtr mk1 and these diagrams look fine but can anyone help me on this one....i will be using this harness from diyautotune:

as you can see this are labeled for every component....so my question is can anyone help me with the pin locations for this cables on the original harness connector? (for the bosch 1 big pin ECU)cause someone posted before but the pins were repeated sometimes so i got confused....thanks for your time bye!

17th February 2009, 22:58

this is what i mean with repeating pins ive sorted the pins by numer and i found several pins with 2 or more sensors attached to them and other ones with no use correct me if im wrong here is the list in order:
1-ignition coil
2-earth
3-inertia fuel shut off
4-not used
5-evaporative emission canister purge valve
6-tachometer (also data link connector?)
7-MAP sensor
8-not used
9-vehicle speed sensor
10-heated oxygen sensor
11-crankshaft position sensor
12-TPS (also MAP sensor?)
13-data link connector
14-earth
15-idle air control
16-data link connector
17-injectors
18-battery
19-crankshaft position sensor (also earth? and heated axygen sensor?)
20-ignition coil
21-not used
22-malfunction indicator lamp (also coded key lamp?)
23-air con
24-not used
25-engine coolant temp sensor
26-engine coolant temp sensor (also intake air temp? and TPS?)
27-intake air temp
28-heated oxygen sensor
29-TPS
30-crankshaft position sensor
31-not used
32-air con
33-idle air control
34-air con
35-coded keypad]
36-not used
37-relay module

hope it helps to someone

18th February 2009, 11:29

What specification Megasquirt did you buy?

20th February 2009, 00:22

hi i've buyed this one MegaSquirt-II EMS System - SMD PCB3.57 http://www.diyautotune.com/catalog/m...ase-p-171.html

anyone can help me on this one....bye!

19th March 2009, 17:50

so anyone here can help me please?? i need to install my megasquirt and i need to know the pins of the ecu...thanks a lot bye!

17th June 2009, 22:19

any chance of the diagram for a Saxo 1.4i or is it the same - i have fan problems

17th June 2009, 23:28

yes, good post..anyone try to pin diagram for the ecu magnetti marelli 48P2.80 3 plug saxo vts?
thanks

18th June 2009, 11:06

anyone know where i could get a pin out for the different multiplugs? i have a vts crossover loom (single plug ecu with big multiplug) and its in a y reg vtr, some pins dont match so i have no speedo, rev counter or temp guage and my battery and handbrake lights are permanently on!

thanks

18th June 2009, 11:18

does any1 have the ecu pin outs from the ecu on a single plug vts setup

cheers

18th June 2009, 13:24

pin diagram ecu 3 plug?
anyone have?

20th June 2009, 13:39

hi all
the wiring diagram on the first page i have a 98 saxo scandal is it for this car
thanks for any help
as i had to get a new coded key done and cant get the K light to go out
mary

5th September 2009, 18:19

does any1 know if a 3 pin vts engine and loom is plug in and play into 3 pin vtr. vts 52 vtr 03 plate ?

9th October 2009, 14:34

hi i no every ones heard this a million times but iv got mk2 vtr 52 plate got bored of the power desided to go and convert it to a vts for the time being when bort a good vts engine got it for a gd price and gd millage so started stripping everything out looked at the loom then it hit me as every one knows and i should of checked i bort a vts engine outa a p reg vts so that makes the plug on the loom not the ecu side the other end is smaller than the mk2 vtr iv looked for 3 plug ecu and loom but nothing flotting about im realy stuck its bin of the road for 2 weeks now and dying to get it running is ther any one that can help me out i carnt find a mk2 vts loom that has the single plug ecu beacuse if i can i think it should be alright coz aint the w reg vts got the big plug but got the single plug ecu can some one help thers gota be some one thats done this not every ones gone bort mk2 vts engine for mk2 saxo is any one can help pleas email me on tup15@hotmail.co.uk thanx as i dont come on here much cheers

9th October 2009, 14:44

Quote:

Originally Posted by tups

hi i no every ones heard this a million times but iv got mk2 vtr 52 plate got bored of the power desided to go and convert it to a vts for the time being when bort a good vts engine got it for a gd price and gd millage so started stripping everything out looked at the loom then it hit me as every one knows and i should of checked i bort a vts engine outa a p reg vts so that makes the plug on the loom not the ecu side the other end is smaller than the mk2 vtr iv looked for 3 plug ecu and loom but nothing flotting about im realy stuck its bin of the road for 2 weeks now and dying to get it running is ther any one that can help me out i carnt find a mk2 vts loom that has the single plug ecu beacuse if i can i think it should be alright coz aint the w reg vts got the big plug but got the single plug ecu can some one help thers gota be some one thats done this not every ones gone bort mk2 vts engine for mk2 saxo is any one can help pleas email me on tup15@hotmail.co.uk thanx as i dont come on here much cheers

And breathe. Mate you need to space out your post and use some punctuation to make it readable. No one will help you when you dont make the effort to make your post readable.

Good luck with the car.

13th November 2009, 16:37

hi guys. i renew my speedo but my rpm is not working.
i have a saxo 1.1l,i put a vtr speedo,is there wiring change to do or to add?

5th March 2010, 15:55

did anu one ever find out about a 3 plug ecu With the bosch labe underneath the pins are marked as
Block 1
HGFEDCBA
4 -- no pins
3 --8 pins
2 --8 pins
1 --8 pins

Block 2
theses pins go to the conector that conects inner loom with engine loom
ABCDEFGHIJKLM
1 -- no pins
2 --12 pins (2e-32)(2g-5)(2h-9)(2i-8)
3 --12 pins (3b-10)(3c-2)(3d-31)(3f-16)(3j-28)(3m-30)(3k-33)
4 --12 pins (4c-29)(4b-1)(4f-7)

Block 3
ABCDEFGH
4 -- no pins
3 --8 pins
2 --8 pins
1 --8 pins

its the ones in red that i need

18th March 2010, 11:33

is this all 4 a mk 1 vtr ????? silver top ????

21st July 2010, 01:18

right so if i wanna convert my 3plug vtr to a single plug vts which diagram do i use???

asap replies would be much greatful

cheers

8th October 2010, 01:12

bit of a bump
ive been searching the internet but cant find what im after
im wanting the interior loom diagram for the elctric windows as im wanting to relocate my switches but also change them into like toggle switches, so really need to work out which each wire does
cheers tiny

8th October 2010, 08:38

Quote:

Originally Posted by tinytim6666

bit of a bump
ive been searching the internet but cant find what im after
im wanting the interior loom diagram for the elctric windows as im wanting to relocate my switches but also change them into like toggle switches, so really need to work out which each wire does
cheers tiny

if its only the elecrtic window wires your playing with then buy a test light and label the wires and see which wires light the test light when you do certain things... from there its easy enough to put those wires to seperate switches and voila... done!

8th October 2010, 15:37

Quote:

Originally Posted by Lippy

if its only the elecrtic window wires your playing with then buy a test light and label the wires and see which wires light the test light when you do certain things... from there its easy enough to put those wires to seperate switches and voila... done!

thank you muchly

theres about 8wires

10th March 2011, 00:08

I had lexus lights on the back and decided to put tinted standard 1s back on, i've matched the wires up but when i hit the indicator with the sidelight on they both flash can some1 please give me a tad advice to fix it

cheers

9th May 2012, 19:29

bit of a bump but im looking for what pins are what on a 3plug vts anyone have this diagram please?

8th July 2012, 22:47

I have a 99 V reg 106 gti donor car and will be shortly buying a 2000 X saxo vtr. I'll be putting the 16v lump into the saxo and will be splicing the looms to match. Once I have it all in bits ill get photos of the 2 different looms and pin outs and label it all up and write up here what pin does what..

As the information on this thread is going to be invaluable to it, ill try and contribute

9th July 2012, 09:39

ive got w-reg vtr crossover loom for sale if its any good to anyone

11th December 2012, 12:25

May be useful, pin out and electrical diagram from citroen dealer.

(for a 2000 vts 16v, 1plug)

http://www.saxperience.com/forum/sho...11#post6175411

11th December 2012, 14:12

Quote:

Originally Posted by RowanVtr

May be useful, pin out and electrical diagram from citroen dealer.

(for a 2000 vts 16v, 1plug)

Forum users will love you, companies will hate you ha. Do you have them for the other models?

P.S if you want to be really helpful start another thread with that in and it will likely get stickied

11th December 2012, 17:59

Cheers mate! Unfortunately I lost my privileges to the citroen network when I left the company.

And I started another thread

26th October 2014, 21:19

Quote:

Originally Posted by Simo

I do have a full ECU pin out somewhere, but I dont have my scanner setup... I grabbed the other diagrams from a PDF.

Let me know if you need anything else

Do you have the pin outs for the 3 plug ECU.??
I can't seem to find them anywhere.

30th April 2016, 14:41

Thanks for the Diesel wiring loom, I am sure that it will help me, I have a TUD5 diesel which came out of a boat, expensive Naval project, it was all attached to a computer and had satellite connection, however I did not get the computer or any of the solenoids. So it is back to basics to fit it into my boat.