Ge Quickshift...?

1. stu113 Frequent Poster Joined: Jan 2009 Middlesex Posts: 745 Saxo 1.1L-Gone Saxo 1.4L VTR

   #1 9th February 2010, 12:33

   Any one got a pic of the gear linkage im looking to fit this to from the top under bonet? Been told can do it that way with induction kit.
2. coleman258 Established Member Joined: Nov 2008 Eastbourne Posts: 2474 Astra van daily Black Saxo VTR 16v'd kent PT51

   #2 9th February 2010, 12:35

   There is a guide on here.
3. johnyh Infrequent Poster Joined: Jan 2010 Shropshire Posts: 127 Corsa VXR Arctic

   #3 9th February 2010, 13:11

   sure there was a thread on here yesterday about it?
4. jinx Frequent Poster Joined: Jun 2008 Staffordshire Posts: 745 Saxo - Furio 1.4

   #4 9th February 2010, 13:20

   http://www.saxperience.com/forum/sho...d.php?t=106672
   
   there you go
5. jinx Frequent Poster Joined: Jun 2008 Staffordshire Posts: 745 Saxo - Furio 1.4

   #5 9th February 2010, 13:21

   I found it easy to do it underneath the car. just make sure you tighten the screw and nut on the top of the GE, or it will come loose.
6. user_25190 Frequent Poster Joined: Jul 2008 Birmingham Posts: 661 Saxo VTR

   #6 9th February 2010, 13:50

   i fitted it to mine this week
   
   bascially you have to jack the car up and wen i was doing it, i was gona pull of the wrong linkage, but the 1 u want is located under the car in the area which i have circled in RED, NOT THE GREEN
   
   jack up the car, 19inch spanner then then pull the link off
   
   when u put ur quick shift on, it might be a bit tight when you fit it over the linkage, just file the hole a bit of use a drill to open the hole out, but no to much
   
   place it on top of then linkage first then tighten that with the alan key, then stick on the rod which goes on the ball connector
   
   heres the pic, hope this helps
7. stu113 Frequent Poster Joined: Jan 2009 Middlesex Posts: 745 Saxo 1.1L-Gone Saxo 1.4L VTR

   #7 9th February 2010, 21:36

   Cheers I dno if i have the balls to do it Easy? Andthing goes wrong?
8. lharrowing Frequent Poster Joined: Nov 2008 norwich Posts: 941 Citroen Saxo Westcoast MK1

   #8 9th February 2010, 23:07

   i did it underneath the car just make sure u have your weetabix in the morning if your only gonna use a screwdriver to pull your gear linkage off as they can be pretty stubborn but apart from that its so easy to do and relly pulls it together nicely i dread to think what it use to be like
9. stu113 Frequent Poster Joined: Jan 2009 Middlesex Posts: 745 Saxo 1.1L-Gone Saxo 1.4L VTR

   #9 10th February 2010, 07:42

   Hmm i will have a go later i guess lol
   Cheers guys
10. raunchz Saxperience Addict Joined: Jul 2005 Solihull / Bournemouth Posts: 14233 2015 Lapiz Blue Golf R

    #10 10th February 2010, 08:16

    Use a 13mm spanner to get the linkage off. Use the open end to lever it off around the 'nipple'
11. user_25190 Frequent Poster Joined: Jul 2008 Birmingham Posts: 661 Saxo VTR

    #11 10th February 2010, 08:28

    easy man, i was shitting it as well, like i told u above, if u want more help just give me a shout