Hey im looking to converting my 8v to a 16v soon when i get a full time job at the end of this year. I have a 51 plate VTR and was wondering what exactly i would be looking for becuase i know there is a slight difference in the mk1 and 2 types... Any help would be appreciated
1.6 16v Engine
-
#1
-
#2Your vtr 3 plug yeh? You'll need a vts engine from a 3plug vts.
-
#4If you buy a 3plug loom, unlocked ecu and engine you're 80% there
-
#5Probably need the vts radiator as i`ve heard with the standard rad thngs runs a little hot.
Steve. -
#6Could do with a fuel return aswell.. not 100% needed but if you're doing a job, might aswell do it properly.
Also remember to upgrade your front brakes. -
#7Why? VTR's and VTS's use the same brakes... The only difference is ABS.Quote:Could do with a fuel return aswell.. not 100% needed but if you're doing a job, might aswell do it properly.
Also remember to upgrade your front brakes.
Standards are adequate for everyday driving. -
#8If he's putting a VTS engine in it, i'm guessing he's going to be pushing it more.
Standard VT brakes are shockingly bad imo. -
#9Had 266mm's on my VTR, awesome brakes, wouldn't need more braking power than that on the road IMO...
Have standards on my VTS, can't fault them other than the fade when having a bit of a blast. -
#10
