Vtr to Vts conversion ?

15th August 2011, 01:10

Hi guys i have a 2000 plate saxo vtr the 90bhp version with the cat in the middle pipe not the manifold.

What would i need to convert it to a vts, obv a vts engine, gearbox, driveshafts... but what else ? will the loom plug strait in etc ?

Sorry if there is another thread i have had a search but not great on a pc so thought i'd just ask.

Cheers peeps.

15th August 2011, 01:14

Plenty of info in the FAQs on the conversion as you have said been asked and done time and time again.

You will need the right engine loom, which is very important as the multiplugs are different. Single plug ecu car to single plug, 3 plug to 3 plug.

The 2000 Should be a single plug although some late ones have the crossover loom which can be a bit of an arse ache.

15th August 2011, 01:18

Quote:

Originally Posted by Ryan

Plenty of info in the FAQs on the conversion as you have said been asked and done time and time again.

You will need the right engine loom, which is very important as the multiplugs are different. Single plug ecu car to single plug, 3 plug to 3 plug.

The 2000 Should be a single plug although some late ones have the crossover loom which can be a bit of an arse ache.

Legend ! ill take a look, Thanks mate ! I think i have the single plug ecu mate.

Chris

15th August 2011, 02:37

Vts Engine
Vts Gearbox
Standard Vts Manifold
Vts inlet manifold
Engine Loom
ECU
Transponder and Key
Ancillaries
And a crane of course.