Name that manifold

1. Gabbastard Saxperience Post Whore Joined: Dec 2002 United Kingdom Posts: 8390

   #1 23rd October 2012, 23:42

   
   
   Mates manifold, no idea what it is. VTR obviously. Any ideas?
2. mlawlan69 Saxperience Forum Bum Joined: Sep 2010 leeds Posts: 4389 MCS R53 S/C 16v furiooo

   #2 24th October 2012, 01:12

   supersprint almost 100% sure.
   
   edit.... however not sure if they had a top lambda sensor hole but looks the same!!!
3. Old_School_Saxo Infrequent Poster Joined: Oct 2012 Cearphilly (Area) Posts: 218 Saxo Ph2 Furio, Fiesta Mk4 1.7, Astra H 1.8 SRI

   #3 24th October 2012, 01:38

   just by looking at it its mild steel and the design looks like sportex manifold lol
4. user_39461 Super Moderator Joined: Nov 2009 Cambridge(ish), UK. Posts: 10581 BMW 5x M50d.

   #4 24th October 2012, 09:06

   It's deffo not a supersprint. I don't know what it is, but it isn't a supersprint for sure. The two middle headers come down parallel/together on a supersprint:
   
5. KamRacing Saxperience Addict Joined: Nov 2006 A farm shed in Aylesbury Posts: 14916 Corolla AE86 Peugeot 205 B18C (in bits)

   #5 24th October 2012, 10:06

   Its not a Supersprint - it has rust on it. The Supersprint 801101 is only made in stainless version...
6. Gabbastard Saxperience Post Whore Joined: Dec 2002 United Kingdom Posts: 8390

   #6 24th October 2012, 12:08

   Yeah shouldve said its obviously mild steel.
   
   Never seen one like that with a lambda boss in the 1st branch.
7. yr51ocw Frequent Poster Joined: Oct 2005 Posts: 751

   #7 24th October 2012, 12:23

   seen those on ebay many years ago with the lambda in one runner of the exhaust. Cant remember the same. Bad placement of the sensor though.
8. welshpug Saxperience Forum Bum Joined: Jul 2010 South Wales Posts: 3078 ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.

   #8 24th October 2012, 12:28

   bob!
   
   
   
   
   
   
9. axsaxoman Saxperience Forum Bum Joined: Jan 2003 Scotland Posts: 3380

   #9 24th October 2012, 15:48

   both these manifolds are wrong , as the lambda probe is taking only gas value from one cylinder ,so if that cylinder runs rich or has an oil burn due to age then other 3 will run lean
10. m4tt274 Saxperience Forum Bum Joined: Sep 2011 Doncaster Posts: 2627 Fabia VRS, mk1 fiesta + some others

    #10 24th October 2012, 17:37

    looks like an old sportex! not many now made in mild.
11. Pricklep Saxperience Hardcore! Joined: Mar 2008 Posts: 31279 Citroen Saxo VTS, S60 D5

    #11 24th October 2012, 17:45

    Quote:

    Originally Posted by m4tt274 looks like an old sportex! not many now made in mild.

    Still making them in mild, so..
    
    http://www.sportex-exhausts.com/Citr...0/cat/2/sub/16
12. ryza Frequent Poster Joined: May 2010 ipswich Posts: 961 track saxo Daily beemer

    #12 24th October 2012, 18:14

    Looks like a janspeed one?
13. m4tt274 Saxperience Forum Bum Joined: Sep 2011 Doncaster Posts: 2627 Fabia VRS, mk1 fiesta + some others

    #13 24th October 2012, 18:34

    Quote:

    Originally Posted by Prickle Still making them in mild, so.. http://www.sportex-exhausts.com/Citr...0/cat/2/sub/16

    worded badly. The 'old' came from the mank state its in. The sportex assumption came from the fact its mild as they are one of only few in mild.
    hence, an old sportex. not an old model of sportex...

    1 user thanked this post: Pricklep
14. Gabbastard Saxperience Post Whore Joined: Dec 2002 United Kingdom Posts: 8390

    #14 24th October 2012, 21:18

    Worth much?
15. Saxovch22 Established Member Joined: Feb 2011 Scotland Posts: 1191 02 Saxo Vts

    #15 24th October 2012, 21:25

    It's not a janspeed or sportex!
    
    Pretty sure it's a John Ashley one!
    They have the lambda in the same branch
16. blackie_2k5 Saxperience Hardcore! Joined: Oct 2008 Birtley Posts: 22253 VTR Turbo, 106 xsi track slag, Transit recovery, B

    #16 24th October 2012, 21:29

    Quote:

    Originally Posted by Saxovch22 It's not a janspeed or sportex! Pretty sure it's a John Ashley one! They have the lambda in the same branch

    my money is here ^^
    
    
    that is a very old mani lol
    
    i had a similar one a few years back that was mild steel (had lambda in correct place though)
    
    after a long time searching i could only ever pin it to being a miltek mild steel..as lower flange was smaller to fit their exhaust
    
    still to this day dont know if its true though
17. Pricklep Saxperience Hardcore! Joined: Mar 2008 Posts: 31279 Citroen Saxo VTS, S60 D5

    #17 25th October 2012, 17:34

    Quote:

    Originally Posted by Saxovch22 It's not a janspeed or sportex! Pretty sure it's a John Ashley one! They have the lambda in the same branch

    
    
    after some bordom searching.. agree its not a janspeed
18. Gabbastard Saxperience Post Whore Joined: Dec 2002 United Kingdom Posts: 8390

    #18 25th October 2012, 18:04

    Thats a VTS one.
19. Pricklep Saxperience Hardcore! Joined: Mar 2008 Posts: 31279 Citroen Saxo VTS, S60 D5

    #19 25th October 2012, 18:12

    oh yer. Still it isnt a janspeed.
    
    http://www.kamracing.co.uk/janspeed-...1996-2000.html
    
    
20. Liamjrhodes Established Member Joined: Jun 2011 Pontefract Posts: 1095 Nissan 200sx s14a Citroen Saxo VTS Austin Mini C

    #20 25th October 2012, 18:59

    Anyone got any idea what mine is?
21. Pricklep Saxperience Hardcore! Joined: Mar 2008 Posts: 31279 Citroen Saxo VTS, S60 D5

    #21 25th October 2012, 19:02

    Does it not tell you on that little thing thats welded on?
    
    raceland?
    
    oh and get some new studs fitted. Not expensive at all.
22. Sophia_Bush Saxperience Post Whore Joined: Jan 2007 Shropshire Posts: 9994 Moonstone Blue 106 GTi

    #22 25th October 2012, 19:22

    Dave you massive fud your one is 100% sportex had one on the old 1.1 mpi thing a few years back could probably get 60-80 for it
23. blackie_2k5 Saxperience Hardcore! Joined: Oct 2008 Birtley Posts: 22253 VTR Turbo, 106 xsi track slag, Transit recovery, B

    #23 25th October 2012, 19:38

    Quote:

    Originally Posted by Liamjrhodes Anyone got any idea what mine is?

    Looks like one of those "hot tuning" things off ebay
24. Liamjrhodes Established Member Joined: Jun 2011 Pontefract Posts: 1095 Nissan 200sx s14a Citroen Saxo VTS Austin Mini C

    #24 25th October 2012, 20:04

    Quote:

    Originally Posted by Prickle Does it not tell you on that little thing thats welded on? raceland? oh and get some new studs fitted. Not expensive at all.

    its got some letters on but very hard to make out, seems to be a code rather than an actual word
    
    And yeah they a temp fix as old ones got pulled out when i hit a raised manhole
    
    
    

    Quote:

    Originally Posted by blackie_2k5 Looks like one of those "hot tuning" things off ebay

    Okay cool, always wondered, as it came on the car
25. Gabbastard Saxperience Post Whore Joined: Dec 2002 United Kingdom Posts: 8390

    #25 25th October 2012, 20:35

    Quote:

    Originally Posted by Liamjrhodes Anyone got any idea what mine is?

    I thought yours was maybe a Devil as I remember it being a fairly unusual design. Not sure if thats one of them though.
26. Pricklep Saxperience Hardcore! Joined: Mar 2008 Posts: 31279 Citroen Saxo VTS, S60 D5

    #26 25th October 2012, 20:37

    Quote:

    Originally Posted by Liamjrhodes its got some letters on but very hard to make out, seems to be a code rather than an actual word And yeah they a temp fix as old ones got pulled out when i hit a raised manhole r

    major ouch! threads knackered then? :/
27. Liamjrhodes Established Member Joined: Jun 2011 Pontefract Posts: 1095 Nissan 200sx s14a Citroen Saxo VTS Austin Mini C

    #27 25th October 2012, 21:22

    Quote:

    Originally Posted by Gabbastard I thought yours was maybe a Devil as I remember it being a fairly unusual design. Not sure if thats one of them though.

    Never heard of one of those but yeat it is a bit unusual lol
    
    
    
    

    Quote:

    Originally Posted by Prickle major ouch! threads knackered then? :/

    Yeah it bent the flange and pushed the joint up, pulling out those two threads at the end, they have been re tapped and have those bolts in for now as its all I had