Be4 hubs/mount setup..

1. gazza808 Frequent Poster Joined: Jul 2007 Posts: 591

   #1 15th November 2012, 11:59

   Who can supply some machines hubs after a pair of machined hubs (plus spacer) for the be4 setup?
   Also after the top gearbox mount?
   I'd rather buy off a one man band then extortionate prices some companies charge
   
   Cheers
2. atspeedracing Frequent Poster Joined: Aug 2008 ESSEX Posts: 727 106 GTi Turbo

   #2 17th November 2012, 14:14

   we sell these, but we use new genuine drive flanges, but the bearings and drive flanges cost like £100 per side? so not cheap unfortuately.
   
   iirc these are £125+vat per side, as a ready to fit, pre machined item, from myself.
   
   you could probably source your own drive flanges from a scrappy and get new bearings and take them to a local machine shop for machining to save yourself some money, but depends what they will charge to machine them, plus you need to sort out the spacer rings, but maybe machine shop can do those too?
   
   
   as for upper mount, i usually only sell the mounts as a pair, but i could probably do an upper mount on its own. we have changed the design slightly, and they are TIG welded, so much neater than the earlier versions.
   
   upper mount only £50+vat (with high tensile nuts/bolts (new genuine peugeot g/box mount bolts)
   lower mount £100+vat (with high tensile nuts/bolts, rose jointed, anodised adjustable lower linkage etc)
   
   hope thats helpful
   
   - colin.
3. e8_pqck Saxperience Forum Bum Joined: Aug 2010 Midlands Posts: 2530 AX 16v Turbo

   #3 17th November 2012, 19:00

   Use a later 37mm bearing. No need for spacers, just machine them to the same dims as an ma hub with a shoulder.
4. welshpug Saxperience Forum Bum Joined: Jul 2010 South Wales Posts: 3078 ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.

   #4 17th November 2012, 19:29

   Quote:

   Originally Posted by atspeedracing we sell these, but we use new genuine drive flanges, but the bearings and drive flanges cost like £100 per side? so not cheap unfortuately.

   I'm guessing you make the faux-pas of buying from a dealer.
   
   drive flange-
   
   £37 http://www.carparts4less.co.uk/cp4l/...8eb72f3&000602
   
   good quality bearing -
   
   £25 http://www.carparts4less.co.uk/cp4l/...c4b7882&000370
   
   that'll be £124 delivered for the pair.
5. atspeedracing Frequent Poster Joined: Aug 2008 ESSEX Posts: 727 106 GTi Turbo

   #5 17th November 2012, 21:34

   That's very useful, thankyou very much for the links. It gives additional options that way.
   
   Cheers
   
   - colin
6. welshpug Saxperience Forum Bum Joined: Jul 2010 South Wales Posts: 3078 ZX 16v, 205 GTI, 309 Goodwood, 405 MI16.

   #6 17th November 2012, 22:57

   no probs nice shiny shit of decent quality rather than grubby scrapyard stuff and questionable motorfactor wheelbearings that seem oh-so common these days.